[Thu May 31 19:13:45 2012] Detection parameters:
  Position = (299.6, 199.4) = 22 37 5.41 -15 24 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.8 +/- 8.5
  Background counts = 11.2
  Rate = 0.002 +/- 0.0005

[Thu May 31 19:13:45 2012] Off-axis axis estimate = 7.18'
[Thu May 31 20:57:12 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:57:12 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Thu May 31 20:57:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.795
[Thu May 31 20:57:12 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.02"
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src25.ximg exists
[Thu May 31 21:49:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src25.csv
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May 31 21:49:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src25.csv
[Thu May 31 21:49:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:49:08 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May 31 21:49:08 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May 31 21:49:08 2012] Fit fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu May 31 21:49:27 2012] Spatial fit model total counts = 150.229000, observed total counts = 152.000000
[Thu May 31 21:49:27 2012] Offset between fit and detection position for source 30 = 0.125248 pixels
[Thu May 31 21:49:27 2012] 150.860600 total counts/ 127.254000 bgd. counts: snr = 2.092655
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.125248 pixels
  Position = (299.5, 199.5) = 22 37 5.43 -15 24 19.5
  Extent = 4.6 (3.2-6.4)", rotation angle = 0
  Source counts = 23.6 +/- 12.3
  Background counts = 127.3
  Rate = 0.001 +/- 0.0005
[Thu May 31 21:49:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:49:27 2012] Source does appear to be extended
[Thu May 31 21:49:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 23:31:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 23:31:47 2012] Initial guess for spatial extent in simple fitting = 4.64"
[Thu May 31 23:31:47 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.917
[Thu May 31 23:31:47 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 4.64"
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jun  1 00:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src23.csv
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jun  1 00:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src23.csv
[Fri Jun  1 00:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jun  1 00:16:27 2012] Fit fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Jun  1 00:16:44 2012] Spatial fit model total counts = 152.000000, observed total counts = 152.000000
[Fri Jun  1 00:16:44 2012] Offset between fit and detection position for source 30 = 0.005449 pixels
[Fri Jun  1 00:16:44 2012] 153.767200 total counts/ 129.582000 bgd. counts: snr = 2.124601
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.005449 pixels
  Position = (299.5, 199.5) = 22 37 5.43 -15 24 19.6
  Extent = 4.5 (3.2-6.4)", rotation angle = 0
  Source counts = 24.2 +/- 12.4
  Background counts = 129.6
  Rate = 0.001 +/- 0.0005
[Fri Jun  1 00:16:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:44 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:16:44 2012] Source does appear to be extended
[Fri Jun  1 00:16:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:21:15 2012] XMMSAS src. selection expression = ellipse(26007.089800, 17308.443400, 272.107208, 272.107208, 0.000000, X, Y)
[Fri Jun  1 01:21:15 2012] Writing source region out to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src30_src.reg
[Fri Jun  1 01:21:15 2012] Extracting stamp from image fullrun_mos2_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (284, 184) - (315, 215)
[Fri Jun  1 01:21:15 2012] XMMSAS bgd. selection expression = annulus(26007.089800, 17308.443400, 453.512013, 907.024026, X, Y)
[Fri Jun  1 01:21:15 2012] Writing fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src30.gif
[Fri Jun  1 01:26:24 2012] Mean detx,y = (-1898.28, -9654.08) 
[Fri Jun  1 01:26:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:26:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:26:33 2012] Setting source spectrum file to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jun  1 01:26:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jun  1 01:32:54 2012] Not generating rmf since there are only 24 counts
[Fri Jun  1 01:32:54 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:58 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:58 2012] Error reading totcts from fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jun  1 01:33:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:59 2012] Using photon index=1.80, rate=0.000996, arf fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src30.arf
[Fri Jun  1 01:33:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:59 2012] Updating source flux to 2.2e-14
[Fri Jun  1 01:34:13 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting