[Thu May 31 19:13:45 2012] Detection parameters:
  Position = (332.3, 219.6) = 22 36 55.57 -15 22 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 7.9
  Background counts = 11.8
  Rate = 0.002 +/- 0.0005

[Thu May 31 19:13:45 2012] Off-axis axis estimate = 6.22'
[Thu May 31 20:57:12 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:57:12 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May 31 20:57:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.793
[Thu May 31 20:57:12 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.54"
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src20.ximg exists
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu May 31 21:49:07 2012] Fit fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src20 appears to have run properly
[Thu May 31 21:49:08 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu May 31 21:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 31 21:49:08 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May 31 21:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 31 21:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:49:27 2012] Spatial fit model total counts = 126.240000, observed total counts = 122.000000
[Thu May 31 21:49:27 2012] Offset between fit and detection position for source 28 = 0.835220 pixels
[Thu May 31 21:49:27 2012] 126.018900 total counts/ 81.568500 bgd. counts: snr = 4.921692
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.835220 pixels
  Position = (332.5, 218.8) = 22 36 55.49 -15 22 55.7
  Extent = 8.4 (3.8-12.5)" x 5.4 (2.5-6.9)", rotation angle = 91 (90-92) degrees
  Source counts = 44.5 +/- 11.2
  Background counts = 81.6
  Rate = 0.002 +/- 0.0005
[Thu May 31 21:49:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:49:27 2012] Source does appear to be extended
[Thu May 31 21:49:27 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.55
[Thu May 31 23:31:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 23:31:47 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Thu May 31 23:31:47 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.147
[Thu May 31 23:31:47 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 6.91"
[Fri Jun  1 00:16:26 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jun  1 00:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src18.csv
[Fri Jun  1 00:16:26 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jun  1 00:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src18.csv
[Fri Jun  1 00:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jun  1 00:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jun  1 00:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jun  1 00:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:16:44 2012] Warning, spatial fit 18 centroid is now closest to src. 6
[Fri Jun  1 00:16:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:44 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:16:44 2012] Source does appear to be extended
[Fri Jun  1 00:16:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.55
[Fri Jun  1 01:21:15 2012] XMMSAS src. selection expression = ellipse(28881.882200, 18984.400200, 504.151215, 324.579609, 91.469440, X, Y)
[Fri Jun  1 01:21:15 2012] Writing source region out to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src28_src.reg
[Fri Jun  1 01:21:15 2012] Extracting stamp from image fullrun_mos2_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (304, 190) - (362, 248)
[Fri Jun  1 01:21:15 2012] XMMSAS bgd. selection expression = annulus(28881.882200, 18984.400200, 840.252024, 1680.504048, X, Y) && !ellipse(30810.820557, 20724.193008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28029.281769, 16668.667618, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 01:21:15 2012] Writing fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src28.gif
[Fri Jun  1 01:25:21 2012] Mean detx,y = (-3984.67, -7100.42) 
[Fri Jun  1 01:25:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:25:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:25:38 2012] Setting source spectrum file to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun  1 01:25:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Jun  1 01:32:29 2012] Not generating rmf since there are only 44 counts
[Fri Jun  1 01:32:29 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:58 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:58 2012] Error reading totcts from fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun  1 01:33:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:59 2012] Using photon index=1.80, rate=0.00183, arf fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src28.arf
[Fri Jun  1 01:33:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:59 2012] Updating source flux to 3.1e-14
[Fri Jun  1 01:34:13 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting