[Thu May 31 19:13:44 2012] Detection parameters:
  Position = (377.8, 335.3) = 22 36 41.88 -15 14 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.9 +/- 11.1
  Background counts = 12.4
  Rate = 0.004 +/- 0.0006

[Thu May 31 19:13:45 2012] Off-axis axis estimate = 6.35'
[Thu May 31 20:57:12 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:57:12 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Thu May 31 20:57:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.023
[Thu May 31 20:57:12 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.60"
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src9.ximg exists
[Thu May 31 21:49:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src9.csv
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May 31 21:49:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src9.csv
[Thu May 31 21:49:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May 31 21:49:07 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May 31 21:49:07 2012] Fit fullrun_mos2_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu May 31 21:49:27 2012] Spatial fit model total counts = 220.366000, observed total counts = 213.000000
[Thu May 31 21:49:27 2012] Offset between fit and detection position for source 14 = 0.279847 pixels
[Thu May 31 21:49:27 2012] 222.999600 total counts/ 188.225000 bgd. counts: snr = 2.534682
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.279847 pixels
  Position = (377.7, 335.5) = 22 36 41.94 -15 14 27.9
  Extent = 3.4 (2.6-5.1)", rotation angle = 0
  Source counts = 34.8 +/- 14.9
  Background counts = 188.2
  Rate = 0.001 +/- 0.0006
[Thu May 31 21:49:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:49:27 2012] Source does appear to be extended
[Thu May 31 21:49:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 23:31:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 23:31:47 2012] Initial guess for spatial extent in simple fitting = 3.45"
[Thu May 31 23:31:47 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.348
[Thu May 31 23:31:47 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 3.45"
[Fri Jun  1 00:16:26 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun  1 00:16:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 00:16:26 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun  1 00:16:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 00:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun  1 00:16:27 2012] fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun  1 00:16:27 2012] Fit fullrun_mos2_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun  1 00:16:44 2012] Spatial fit model total counts = 220.344000, observed total counts = 213.000000
[Fri Jun  1 00:16:44 2012] Offset between fit and detection position for source 14 = 0.003597 pixels
[Fri Jun  1 00:16:44 2012] 223.321300 total counts/ 189.437000 bgd. counts: snr = 2.461876
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.003597 pixels
  Position = (377.7, 335.5) = 22 36 41.93 -15 14 27.9
  Extent = 3.5 (2.5-5.2)", rotation angle = 0
  Source counts = 33.9 +/- 14.9
  Background counts = 189.4
  Rate = 0.001 +/- 0.0006
[Fri Jun  1 00:16:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:44 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:16:44 2012] Source does appear to be extended
[Fri Jun  1 00:16:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:21:14 2012] XMMSAS src. selection expression = ellipse(32808.813800, 29140.193000, 208.736406, 208.736406, 0.000000, X, Y)
[Fri Jun  1 01:21:14 2012] Writing source region out to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src14_src.reg
[Fri Jun  1 01:21:14 2012] Extracting stamp from image fullrun_mos2_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (366, 324) - (390, 347)
[Fri Jun  1 01:21:14 2012] XMMSAS bgd. selection expression = annulus(32808.813800, 29140.193000, 347.894010, 695.788020, X, Y) && !ellipse(33573.571400, 28907.344400, 392.098411, 392.098411, 0.000000, X, Y)
[Fri Jun  1 01:21:14 2012] Writing fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src14.gif
[Fri Jun  1 01:23:17 2012] Mean detx,y = (-4147.87, 3800.04) 
[Fri Jun  1 01:23:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:23:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:23:25 2012] Setting source spectrum file to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun  1 01:23:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jun  1 01:31:36 2012] Not generating rmf since there are only 33 counts
[Fri Jun  1 01:31:36 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:58 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:58 2012] Error reading totcts from fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun  1 01:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:58 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos2_xmm0056021601_pi300-10000_pass1_cl_src14.arf
[Fri Jun  1 01:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:58 2012] Updating source flux to 2.8e-14
[Fri Jun  1 01:34:13 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting