[Thu May 31 19:13:20 2012] Detection parameters:
  Position = (332.1, 220.5) = 22 36 55.63 -15 22 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 10.0
  Background counts = 10.1
  Rate = 0.004 +/- 0.0006

[Thu May 31 19:13:20 2012] Off-axis axis estimate = 6.16'
[Thu May 31 20:16:20 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:16:20 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Thu May 31 20:16:20 2012] source mask rpix=2.2, npix_max = 28, mask sum = 28, frac = 0.971
[Thu May 31 20:16:20 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.51"
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src9.ximg exists
[Thu May 31 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src9.csv
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May 31 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src9.csv
[Thu May 31 20:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May 31 20:57:11 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu May 31 21:49:22 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.070098 pixels away
[Thu May 31 21:49:22 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:22 2012] Assessing source extent using major
[Thu May 31 21:49:22 2012] Source does appear to be extended
[Thu May 31 21:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:55:31 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Thu May 31 22:55:31 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Thu May 31 22:55:31 2012] source mask rpix=2.2, npix_max = 28, mask sum = 28, frac = 0.971
[Thu May 31 22:55:31 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.51"
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 31 23:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src9.csv
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 31 23:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src9.csv
[Thu May 31 23:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 23:31:47 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 31 23:31:47 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 31 23:31:47 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun  1 00:16:40 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 30.658456 pixels away
[Fri Jun  1 00:16:40 2012] Source 26 is offset by 7.197467 and 6.908131 pixels which is larger than
2 X fitted extent = 1.544409 x 1.544409, not incorporating fit results
[Fri Jun  1 00:16:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:40 2012] Assessing source extent using major
[Fri Jun  1 00:16:40 2012] Source does appear to be extended
[Fri Jun  1 00:16:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:06:48 2012] XMMSAS src. selection expression = ellipse(28841.513641, 19132.091415, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 01:06:48 2012] Writing source region out to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src26_src.reg
[Fri Jun  1 01:06:48 2012] Extracting stamp from image fullrun_mos1_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (295, 183) - (370, 258)
[Fri Jun  1 01:06:48 2012] XMMSAS bgd. selection expression = annulus(28841.513641, 19132.091415, 1087.500000, 2175.000000, X, Y) && !ellipse(30829.349400, 20708.356200, 359.966410, 359.966410, 0.000000, X, Y) && !ellipse(28053.254458, 16719.294400, 312.796009, 312.796009, 0.000000, X, Y) && !ellipse(27477.625200, 21116.810600, 278.264808, 278.264808, 0.000000, X, Y)
[Fri Jun  1 01:06:48 2012] Writing fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src26.gif
[Fri Jun  1 01:08:43 2012] Mean detx,y = (-6763.64, 3699.66) 
[Fri Jun  1 01:08:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:09:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:09:06 2012] Setting source spectrum file to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun  1 01:09:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Jun  1 01:19:37 2012] Not generating rmf since there are only 57 counts
[Fri Jun  1 01:19:37 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:57 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:57 2012] Error reading totcts from fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun  1 01:33:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:57 2012] Using photon index=1.80, rate=0.00361, arf fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src26.arf
[Fri Jun  1 01:33:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:57 2012] Updating source flux to 6.6e-14
[Fri Jun  1 01:34:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting