[Thu May 31 19:13:19 2012] Detection parameters:
  Position = (313.8, 319.9) = 22 37 1.12 -15 15 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.8 +/- 9.2
  Background counts = 13.7
  Rate = 0.001 +/- 0.0004

[Thu May 31 19:13:20 2012] Off-axis axis estimate = 1.92'
[Thu May 31 20:16:20 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:16:20 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Thu May 31 20:16:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Thu May 31 20:16:20 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.39"
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src26.ximg exists
[Thu May 31 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src26.csv
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu May 31 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src26.csv
[Thu May 31 20:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:57:12 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu May 31 20:57:12 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May 31 20:57:12 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu May 31 21:49:22 2012] Source 17 is offset by -2.380967 and 5.223754 pixels which is larger than
2 X fitted extent = 2.892607 x 2.892607, not incorporating fit results
[Thu May 31 21:49:22 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:22 2012] Assessing source extent using major
[Thu May 31 21:49:22 2012] Source does appear to be extended
[Thu May 31 21:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:55:31 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu May 31 22:55:31 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Thu May 31 22:55:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Thu May 31 22:55:31 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 7.39"
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src23.ximg exists
[Thu May 31 23:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src23.csv
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu May 31 23:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src23.csv
[Thu May 31 23:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 23:31:47 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu May 31 23:31:47 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu May 31 23:31:47 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Jun  1 00:16:40 2012] Source 17 is offset by -2.387334 and 5.129524 pixels which is larger than
2 X fitted extent = 2.868138 x 2.868138, not incorporating fit results
[Fri Jun  1 00:16:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:40 2012] Assessing source extent using major
[Fri Jun  1 00:16:40 2012] Source does appear to be extended
[Fri Jun  1 00:16:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:06:48 2012] XMMSAS src. selection expression = ellipse(27255.377899, 27785.122620, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 01:06:48 2012] Writing source region out to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src17_src.reg
[Fri Jun  1 01:06:48 2012] Extracting stamp from image fullrun_mos1_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (276, 282) - (351, 357)
[Fri Jun  1 01:06:48 2012] XMMSAS bgd. selection expression = annulus(27255.377899, 27785.122620, 1087.500000, 2175.000000, X, Y) && !ellipse(27605.852000, 26757.970000, 754.535222, 754.535222, 0.000000, X, Y) && !ellipse(28048.002380, 27271.937317, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 01:06:48 2012] Writing fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src17.gif
[Fri Jun  1 01:12:00 2012] Mean detx,y = (771.56, -694.44) 
[Fri Jun  1 01:12:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:12:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:12:11 2012] Setting source spectrum file to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jun  1 01:12:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Jun  1 01:21:05 2012] Not generating rmf since there are only 34 counts
[Fri Jun  1 01:21:05 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:57 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:57 2012] Error reading totcts from fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jun  1 01:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:58 2012] Using photon index=1.80, rate=0.00147, arf fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src17.arf
[Fri Jun  1 01:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:58 2012] Updating source flux to 1.4e-14
[Fri Jun  1 01:34:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting