[Thu May 31 19:13:19 2012] Detection parameters:
  Position = (462.7, 281.0) = 22 36 16.36 -15 18 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.6 +/- 17.8
  Background counts = 10.3
  Rate = 0.02 +/- 0.001

[Thu May 31 19:13:20 2012] Off-axis axis estimate = 11.98'
[Thu May 31 20:16:20 2012] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:16:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 20:16:20 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Thu May 31 20:16:20 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.933
[Thu May 31 20:16:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.42"
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 20:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 20:57:11 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 20:57:11 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 21:49:22 2012] Spatial fit model total counts = 396.370000, observed total counts = 396.000000
[Thu May 31 21:49:22 2012] Offset between fit and detection position for source 1 = 0.134026 pixels
[Thu May 31 21:49:22 2012] 398.103000 total counts/ 245.636000 bgd. counts: snr = 9.728141
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.134026 pixels
  Position = (462.6, 280.9) = 22 36 16.39 -15 18 25.3
  Extent = 6.3 (5.4-7.4)", rotation angle = 0
  Source counts = 152.5 +/- 20.0
  Background counts = 245.6
  Rate = 0.006 +/- 0.0008
[Thu May 31 21:49:22 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:22 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:49:22 2012] Source does appear to be extended
[Thu May 31 21:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:55:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 22:55:31 2012] Initial guess for spatial extent in simple fitting = 6.26"
[Thu May 31 22:55:31 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Thu May 31 22:55:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.26"
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 23:31:46 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 23:31:46 2012] fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 23:31:46 2012] Fit fullrun_mos1_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 00:16:40 2012] Spatial fit model total counts = 279.998000, observed total counts = 280.000000
[Fri Jun  1 00:16:40 2012] Offset between fit and detection position for source 1 = 0.088050 pixels
[Fri Jun  1 00:16:40 2012] 288.390000 total counts/ 141.031000 bgd. counts: snr = 12.408503
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.088050 pixels
  Position = (462.5, 280.8) = 22 36 16.41 -15 18 25.6
  Extent = 6.1 (5.2-7.2)", rotation angle = 0
  Source counts = 147.4 +/- 17.0
  Background counts = 141.0
  Rate = 0.006 +/- 0.0007
[Fri Jun  1 00:16:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:40 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:16:40 2012] Source does appear to be extended
[Fri Jun  1 00:16:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:06:47 2012] XMMSAS src. selection expression = ellipse(40191.610400, 24380.950000, 363.378010, 363.378010, 0.000000, X, Y)
[Fri Jun  1 01:06:47 2012] Writing source region out to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 01:06:47 2012] Extracting stamp from image fullrun_mos1_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (442, 260) - (483, 302)
[Fri Jun  1 01:06:47 2012] XMMSAS bgd. selection expression = annulus(40191.610400, 24380.950000, 605.630017, 1211.260035, X, Y)
[Fri Jun  1 01:06:47 2012] Writing fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 01:06:50 2012] Mean detx,y = (2071.19, 12569.48) 
[Fri Jun  1 01:06:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:06:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:06:59 2012] Setting source spectrum file to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 01:06:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 01:33:57 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:57 2012] Error reading totcts from fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 01:33:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:57 2012] Using photon index=1.80, rate=0.00606, arf fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 01:33:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:57 2012] Updating source flux to 1.3e-13
[Fri Jun  1 01:34:13 2012] Reading fit data from xmm0056021601/analysis//spectral/fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  1 01:34:13 2012] Spectral fit parameter nH value = 1.03956e+16
[Fri Jun  1 01:34:13 2012] Spectral fit parameter PhoIndex value = 2.04723
[Fri Jun  1 01:34:13 2012] Failed to get F(0.3-8.0) from xmm0056021601/analysis//spectral/fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 01:34:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:34:13 2012] Using Nh = 1e+16, photon index=2.05, rate=0.00606, arf fullrun_mos1_xmm0056021601_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 01:34:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:34:13 2012] Updating source flux to 1.2e-13