[Sun Jun  9 23:44:08 2013] Detection parameters:
  Position = (305.0, 173.9) = 13 8 28.48 53 34 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.8 +/- 10.8
  Background counts = 19.2
  Rate = 0.004 +/- 0.0008

[Sun Jun  9 23:44:08 2013] Off-axis axis estimate = 9.04'
[Sun Jun  9 23:46:18 2013] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 23:46:18 2013] Initial guess for spatial extent in simple fitting = 10.95"
[Sun Jun  9 23:46:18 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Sun Jun  9 23:46:18 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.95"
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src42.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src42.csv
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src42.csv
[Mon Jun 10 00:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jun 10 00:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:25:33 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.925106 pixels away
[Mon Jun 10 02:25:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 02:25:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 02:25:33 2013] Assessing source extent using major
[Mon Jun 10 02:25:33 2013] Source does appear to be extended
[Mon Jun 10 02:25:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 02:25:56 2013] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:25:56 2013] Initial guess for spatial extent in simple fitting = 10.95"
[Mon Jun 10 02:25:56 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Mon Jun 10 02:25:56 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 10.95"
[Mon Jun 10 03:42:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src42.ximg exists
[Mon Jun 10 03:42:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon Jun 10 03:42:07 2013] Fit fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src42 appears to have run properly
[Mon Jun 10 03:42:08 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon Jun 10 03:42:08 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon Jun 10 03:42:08 2013] Fit fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Mon Jun 10 04:57:18 2013] Spatial fit model total counts = 250.403000, observed total counts = 241.000000
[Mon Jun 10 04:57:18 2013] Offset between fit and detection position for source 43 = 2.131021 pixels
[Mon Jun 10 04:57:18 2013] 251.234700 total counts/ 178.179000 bgd. counts: snr = 5.473005
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.131021 pixels
  Position = (304.0, 175.7) = 13 8 28.98 53 35 5.9
  Extent = 21.9 (16.6-43.8)" x 5.2 (3.4-8.0)", rotation angle = 235 (227-242) degrees
  Source counts = 73.1 +/- 15.9
  Background counts = 178.2
  Rate = 0.003 +/- 0.0006
[Mon Jun 10 04:57:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 04:57:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 04:57:18 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 04:57:18 2013] Source does appear to be extended
[Mon Jun 10 04:57:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.06
[Mon Jun 10 04:57:18 2013] Source is asymmetric
[Mon Jun 10 04:57:36 2013] XMMSAS src. selection expression = ellipse(26401.989400, 15240.866400, 1314.060038, 314.925009, 234.773808, X, Y)
[Mon Jun 10 04:57:36 2013] Writing source region out to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43_src.reg
[Mon Jun 10 04:57:36 2013] Extracting stamp from image fullrun_pn_xmm0056021001_pi300-10000_cl_sm2.00.img.gz, (229, 100) - (380, 251)
[Mon Jun 10 04:57:36 2013] XMMSAS bgd. selection expression = annulus(26401.989400, 15240.866400, 2190.100063, 4380.200126, X, Y) && !ellipse(30114.499298, 13402.886002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30653.669373, 14144.699860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23306.181122, 19432.393814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.297974, 17907.443222, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:57:36 2013] Writing fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43.gif
[Mon Jun 10 05:27:38 2013] Mean detx,y = (3997.01, -8045.77) 
[Mon Jun 10 05:27:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:28:07 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:28:08 2013] Setting source spectrum file to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Jun 10 05:28:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Jun 10 06:09:04 2013] Not generating rmf since there are only 73 counts
[Mon Jun 10 06:09:04 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:03:24 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:03:24 2013] Total counts from fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 143.00
[Mon Jun 10 07:03:24 2013] Total counts from fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43_bgd.pi.gz = 3986.00
[Mon Jun 10 07:03:24 2013] Got source and background scale factors 1159456.000000, 38206369.000000
[Mon Jun 10 07:03:24 2013] User source parameters:
  Position = (304.0, 175.7) = 13 8 28.98 53 35 5.9
  Extent = 21.9 (16.6-43.8)" x 5.2 (3.4-8.0)", rotation angle = 235 (227-242) degrees
  Source aperture counts = 22.0 +/- 13.0
  Background aperture counts = 121.0
  Rate = 0.0009 +/- 0.0005

[Mon Jun 10 07:03:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:03:25 2013] Using photon index=1.80, rate=0.00293, arf fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43.arf
[Mon Jun 10 07:03:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:03:25 2013] Updating source flux to 1.3e-14
[Mon Jun 10 07:03:55 2013] Source 43 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:04:05 2013] xmm0056021001/analysis//spectral/fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete