[Sun Jun  9 23:44:07 2013] Detection parameters:
  Position = (187.0, 263.6) = 13 9 26.28 53 41 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8357.0 +/- 105.0
  Background counts = 26.5
  Rate = 0.3 +/- 0.004

[Sun Jun  9 23:44:08 2013] Off-axis axis estimate = 8.46'
[Sun Jun  9 23:46:18 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 23:46:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 23:46:18 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Sun Jun  9 23:46:18 2013] source mask rpix=2.5, npix_max = 34, mask sum = 26, frac = 0.747
[Sun Jun  9 23:46:18 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.66"
[Mon Jun 10 00:44:06 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 10 00:44:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src4.csv
[Mon Jun 10 00:44:06 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 10 00:44:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src4.csv
[Mon Jun 10 00:44:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 10 00:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:25:32 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.120351 pixels away
[Mon Jun 10 02:25:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 02:25:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 02:25:33 2013] Assessing source extent using major
[Mon Jun 10 02:25:33 2013] Source does appear to be extended
[Mon Jun 10 02:25:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 02:25:56 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:25:56 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Mon Jun 10 02:25:56 2013] source mask rpix=2.5, npix_max = 34, mask sum = 26, frac = 0.747
[Mon Jun 10 02:25:56 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.66"
[Mon Jun 10 03:42:06 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 10 03:42:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src4.csv
[Mon Jun 10 03:42:06 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 10 03:42:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src4.csv
[Mon Jun 10 03:42:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 03:42:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 10 03:42:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 10 03:42:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 10 03:42:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 10 03:42:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 04:57:18 2013] Spatial fit model total counts = 11903.900000, observed total counts = 8665.000000
[Mon Jun 10 04:57:18 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 04:57:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 04:57:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 04:57:18 2013] Assessing source extent using major
[Mon Jun 10 04:57:18 2013] Source does appear to be extended
[Mon Jun 10 04:57:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:57:36 2013] Counts = 8357.000000, rescaling region sizes by 2.000000
[Mon Jun 10 04:57:36 2013] XMMSAS src. selection expression = ellipse(16221.864685, 22886.774109, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 04:57:36 2013] Writing source region out to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun 10 04:57:36 2013] Extracting stamp from image fullrun_pn_xmm0056021001_pi300-10000_cl_sm2.00.img.gz, (112, 189) - (262, 339)
[Mon Jun 10 04:57:36 2013] XMMSAS bgd. selection expression = annulus(16221.864685, 22886.774109, 4350.000000, 8700.000000, X, Y) && !ellipse(20659.726242, 25411.563599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.543600, 23818.113200, 1164.896034, 1164.896034, 0.000000, X, Y) && !ellipse(22190.703751, 21181.277542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21365.932000, 30497.328200, 390.680011, 390.680011, 0.000000, X, Y) && !ellipse(18315.002560, 25772.119900, 596.767217, 459.104813, 43.877041, X, Y) && !ellipse(20915.167938, 17265.178360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21436.809509, 30961.974030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12291.307541, 29091.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20292.555740, 28792.275200, 387.152811, 387.152811, 0.000000, X, Y) && !ellipse(18085.675339, 27817.235199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14559.634476, 27565.793304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23323.852200, 27469.859000, 359.492010, 359.492010, 0.000000, X, Y) && !ellipse(24686.841492, 24684.019196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.747009, 24133.782959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13936.852200, 24130.546280, 359.303210, 359.303210, 0.000000, X, Y) && !ellipse(15224.113000, 20930.117800, 694.812820, 211.859206, 98.150100, X, Y) && !ellipse(21162.389664, 20529.386871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23306.181122, 19432.393814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.297974, 17907.443222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16690.212000, 14733.595200, 384.388811, 384.388811, 0.000000, X, Y) && !ellipse(20281.296951, 15670.448288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26401.989400, 15240.866400, 1752.080050, 419.900012, 234.773808, X, Y)
[Mon Jun 10 04:57:36 2013] Writing fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4.gif
[Mon Jun 10 04:59:17 2013] Mean detx,y = (8878.90, 3808.37) 
[Mon Jun 10 04:59:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:01:59 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:02:00 2013] Setting source spectrum file to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 10 05:02:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun 10 05:49:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 05:49:59 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:03:13 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:03:13 2013] Total counts from fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 9615.00
[Mon Jun 10 07:03:13 2013] Total counts from fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4_bgd.pi.gz = 10790.00
[Mon Jun 10 07:03:14 2013] Got source and background scale factors 4594443.000000, 97793686.000000
[Mon Jun 10 07:03:14 2013] User source parameters:
  Position = (187.0, 263.6) = 13 9 26.28 53 41 32.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 9108.1 +/- 99.1
  Background aperture counts = 506.9
  Rate = 0.4 +/- 0.004

[Mon Jun 10 07:03:14 2013] Updating counts from extracted products
[Mon Jun 10 07:03:14 2013] Set source signif. to 9108.08/22.51 = 404.53
[Mon Jun 10 07:03:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:03:24 2013] Using photon index=1.80, rate=0.365, arf fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4.arf
[Mon Jun 10 07:03:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:03:24 2013] Updating source flux to 1.5e-12
[Mon Jun 10 07:03:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:04:05 2013] xmm0056021001/analysis//spectral/fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete