[Sun Jun  9 23:44:08 2013] Detection parameters:
  Position = (287.3, 206.4) = 13 8 37.16 53 37 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 12.3
  Background counts = 22.9
  Rate = 0.005 +/- 0.0008

[Sun Jun  9 23:44:08 2013] Off-axis axis estimate = 6.72'
[Sun Jun  9 23:46:18 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 23:46:18 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Sun Jun  9 23:46:18 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.562
[Sun Jun  9 23:46:18 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.79"
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src38.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src38.csv
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src38_1.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src38.csv
[Mon Jun 10 00:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Mon Jun 10 00:44:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Mon Jun 10 00:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Mon Jun 10 00:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:25:33 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.100121 pixels away
[Mon Jun 10 02:25:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 02:25:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 02:25:33 2013] Assessing source extent using major
[Mon Jun 10 02:25:33 2013] Source does appear to be extended
[Mon Jun 10 02:25:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 02:25:56 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:25:56 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon Jun 10 02:25:56 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.562
[Mon Jun 10 02:25:56 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 9.79"
[Mon Jun 10 03:42:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src38.ximg exists
[Mon Jun 10 03:42:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src38.csv
[Mon Jun 10 03:42:07 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon Jun 10 03:42:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src38.csv
[Mon Jun 10 03:42:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 03:42:08 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon Jun 10 03:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src38.csv
[Mon Jun 10 03:42:08 2013] fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon Jun 10 03:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src38.csv
[Mon Jun 10 03:42:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021001_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 04:57:18 2013] Spatial fit model total counts = 343.138000, observed total counts = 292.000000
[Mon Jun 10 04:57:18 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 04:57:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 04:57:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 04:57:18 2013] Assessing source extent using major
[Mon Jun 10 04:57:18 2013] Source does appear to be extended
[Mon Jun 10 04:57:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:57:36 2013] XMMSAS src. selection expression = ellipse(24945.297974, 17907.443222, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:57:36 2013] Writing source region out to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39_src.reg
[Mon Jun 10 04:57:36 2013] Extracting stamp from image fullrun_pn_xmm0056021001_pi300-10000_cl_sm2.00.img.gz, (250, 169) - (325, 244)
[Mon Jun 10 04:57:36 2013] XMMSAS bgd. selection expression = annulus(24945.297974, 17907.443222, 1087.500000, 2175.000000, X, Y) && !ellipse(26170.188400, 20339.752000, 389.425611, 389.425611, 0.000000, X, Y) && !ellipse(23306.181122, 19432.393814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26401.989400, 15240.866400, 1752.080050, 419.900012, 234.773808, X, Y)
[Mon Jun 10 04:57:36 2013] Writing fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39.gif
[Mon Jun 10 05:25:43 2013] Mean detx,y = (3850.44, -4940.86) 
[Mon Jun 10 05:25:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:26:04 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:26:04 2013] Setting source spectrum file to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Jun 10 05:26:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon Jun 10 06:08:18 2013] Not generating rmf since there are only 72 counts
[Mon Jun 10 06:08:18 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:03:23 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:03:23 2013] Total counts from fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 222.00
[Mon Jun 10 07:03:23 2013] Total counts from fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39_bgd.pi.gz = 1050.00
[Mon Jun 10 07:03:23 2013] Got source and background scale factors 1234379.000000, 9531191.000000
[Mon Jun 10 07:03:23 2013] User source parameters:
  Position = (287.3, 206.4) = 13 8 37.16 53 37 16.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.0 +/- 15.9
  Background aperture counts = 136.0
  Rate = 0.003 +/- 0.0006

[Mon Jun 10 07:03:23 2013] Updating counts from extracted products
[Mon Jun 10 07:03:23 2013] Set source signif. to 86.02/11.66 = 7.38
[Mon Jun 10 07:03:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:03:25 2013] Using photon index=1.80, rate=0.00345, arf fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39.arf
[Mon Jun 10 07:03:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:03:25 2013] Updating source flux to 1.3e-14
[Mon Jun 10 07:03:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:04:05 2013] xmm0056021001/analysis//spectral/fullrun_pn_xmm0056021001_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete