[Mon May 6 01:15:07 2013] Detection parameters: Position = (310.0, 327.0) = 12 41 28.94 32 50 44.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 160.6 +/- 20.2 Background counts = 53.4 Rate = 0.009 +/- 0.001 [Mon May 6 01:15:07 2013] Off-axis axis estimate = 2.23' [Mon May 6 01:17:03 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:17:03 2013] Initial guess for spatial extent in simple fitting = 7.55" [Mon May 6 01:17:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801 [Mon May 6 01:17:03 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.55" [Mon May 6 02:11:16 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass0_src15.ximg exists [Mon May 6 02:11:16 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass0_src15_1.ximg exists [Mon May 6 02:11:16 2013] Fit fullrun_pn_xmm0056020901_pi300-10000_cl_pass0_src15 appears to have run properly [Mon May 6 02:11:16 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Mon May 6 02:11:16 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Mon May 6 02:11:16 2013] Fit fullrun_pn_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Mon May 6 04:10:21 2013] Spatial fit model total counts = 743.652000, observed total counts = 709.000000 [Mon May 6 04:10:21 2013] Offset between fit and detection position for source 15 = 3.248145 pixels [Mon May 6 04:10:21 2013] Warning, changing simple spatial fit ID from 15 to 13 [Mon May 6 04:10:21 2013] 678.790600 total counts/ 600.335000 bgd. counts: snr = 3.202043 Spatial fit parameters: Offset between fit and detection position for source 15 = 3.248145 pixels Position = (306.9, 327.8) = 12 41 30.02 32 50 48.0 Extent = 15.5 (15.5-31.1)", rotation angle = 0 Source counts = 78.5 +/- 26.1 Background counts = 600.3 Rate = 0.005 +/- 0.002 [Mon May 6 04:10:21 2013] Vigneting correction estimate = 1.000000 [Mon May 6 04:10:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 04:10:21 2013] Assessing source extent using major axis lower bound [Mon May 6 04:10:21 2013] Source does appear to be extended [Mon May 6 04:10:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 04:10:21 2013] Source is confused with source 1 [Mon May 6 04:10:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 04:10:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 04:10:40 2013] Initial guess for spatial extent in simple fitting = 15.53" [Mon May 6 04:10:40 2013] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.966 [Mon May 6 04:10:40 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 15.53" [Mon May 6 05:08:39 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_src15.ximg exists [Mon May 6 05:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_src15.csv [Mon May 6 05:08:39 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_src15_1.ximg exists [Mon May 6 05:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_src15.csv [Mon May 6 05:08:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 05:08:40 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Mon May 6 05:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src15.csv [Mon May 6 05:08:40 2013] fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Mon May 6 05:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src15.csv [Mon May 6 05:08:40 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 07:02:15 2013] Warning, spatial fit 15 centroid is now closest to src. 12 [Mon May 6 07:02:15 2013] Vigneting correction estimate = 1.000000 [Mon May 6 07:02:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 07:02:15 2013] Assessing source extent using major axis lower bound [Mon May 6 07:02:15 2013] Source does appear to be extended [Mon May 6 07:02:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 07:02:33 2013] XMMSAS src. selection expression = ellipse(26648.442000, 28473.394000, 931.590027, 931.590027, 0.000000, X, Y) [Mon May 6 07:02:33 2013] Writing source region out to fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15_src.reg [Mon May 6 07:02:33 2013] Extracting stamp from image fullrun_pn_xmm0056020901_pi300-10000_cl_sm2.00.img.gz, (253, 274) - (360, 381) [Mon May 6 07:02:33 2013] XMMSAS bgd. selection expression = annulus(26648.442000, 28473.394000, 1552.650045, 3105.300089, X, Y) && !ellipse(26343.250000, 28301.836200, 1207.312035, 1207.312035, 0.000000, X, Y) && !ellipse(25395.391815, 29152.675110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27246.462311, 28829.069519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24219.779358, 28935.660980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.694000, 26851.518000, 1126.432032, 1126.432032, 0.000000, X, Y) && !ellipse(24494.407623, 27362.585327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25972.385437, 26664.405548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26494.414642, 26396.263519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30428.180389, 25803.833557, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 07:02:33 2013] Writing fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15.gif [Mon May 6 07:08:54 2013] Mean detx,y = (803.82, -277.36) [Mon May 6 07:08:56 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 07:09:30 2013] Binned source spectrum to 10 counts/bin [Mon May 6 07:09:30 2013] Setting source spectrum file to fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Mon May 6 07:09:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15_bgd.pi.gz [Mon May 6 07:34:04 2013] Not generating rmf since there are only 78 counts [Mon May 6 07:34:04 2013] rmf not generated due to insufficient counts [Mon May 6 08:20:13 2013] Updating aperture counts using extracted products [Mon May 6 08:20:13 2013] Total counts from fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 1761.00 [Mon May 6 08:20:13 2013] Total counts from fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1593.00 [Mon May 6 08:20:13 2013] Got source and background scale factors 2605988.000000, 12222028.000000 [Mon May 6 08:20:13 2013] User source parameters: Position = (306.9, 327.8) = 12 41 30.02 32 50 48.0 Extent = 15.5 (15.5-31.1)", rotation angle = 0 Source aperture counts = 1421.3 +/- 43.0 Background aperture counts = 339.7 Rate = 0.09 +/- 0.003 [Mon May 6 08:20:15 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 08:20:15 2013] Using photon index=1.80, rate=0.00478, arf fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15.arf [Mon May 6 08:20:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 08:20:15 2013] Updating source flux to 1.1e-14 [Mon May 6 08:20:26 2013] Flag c found in src. 15 procflags, skipping spectral fitting [Mon May 6 08:20:26 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting [Mon May 6 08:20:29 2013] xmm0056020901/analysis//spectral/fullrun_pn_xmm0056020901_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete