[Mon May  6 01:15:29 2013] Detection parameters:
  Position = (370.6, 498.2) = 12 41 7.98 33 3 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.0 +/- 10.2
  Background counts = 6.7
  Rate = 0.002 +/- 0.0004

[Mon May  6 01:15:30 2013] Off-axis axis estimate = 15.40'
[Mon May  6 02:11:17 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Mon May  6 02:11:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  6 02:11:17 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Mon May  6 02:11:17 2013] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Mon May  6 02:11:17 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 14.13"
[Mon May  6 03:03:33 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_src16.ximg exists
[Mon May  6 03:03:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_src16.csv
[Mon May  6 03:03:33 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon May  6 03:03:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_src16.csv
[Mon May  6 03:03:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 03:03:34 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon May  6 03:03:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May  6 03:03:34 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon May  6 03:03:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May  6 03:03:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056020901_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 04:10:25 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.324573 pixels away
[Mon May  6 04:10:26 2013] Vigneting correction estimate = 1.000000
[Mon May  6 04:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 04:10:26 2013] Assessing source extent using major
[Mon May  6 04:10:26 2013] Source does appear to be extended
[Mon May  6 04:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 05:08:40 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Mon May  6 05:08:40 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Mon May  6 05:08:40 2013] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Mon May  6 05:08:40 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 14.13"
[Mon May  6 06:03:52 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_src16.ximg exists
[Mon May  6 06:03:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_src16.csv
[Mon May  6 06:03:52 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon May  6 06:03:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_src16.csv
[Mon May  6 06:03:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 06:03:52 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon May  6 06:03:52 2013] fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon May  6 06:03:52 2013] Fit fullrun_mos1_xmm0056020901_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon May  6 07:02:19 2013] Spatial fit model total counts = 150.667000, observed total counts = 137.000000
[Mon May  6 07:02:19 2013] Offset between fit and detection position for source 2 = 0.279551 pixels
[Mon May  6 07:02:19 2013] 148.900200 total counts/ 104.363000 bgd. counts: snr = 4.359630
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.279551 pixels
  Position = (370.3, 498.3) = 12 41 8.07 33 3 9.2
  Extent = 7.7 (5.3-10.6)", rotation angle = 0
  Source counts = 44.5 +/- 12.2
  Background counts = 104.4
  Rate = 0.002 +/- 0.0005
[Mon May  6 07:02:19 2013] Vigneting correction estimate = 1.000000
[Mon May  6 07:02:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 07:02:19 2013] Assessing source extent using major axis lower bound
[Mon May  6 07:02:19 2013] Source does appear to be extended
[Mon May  6 07:02:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 07:51:12 2013] XMMSAS src. selection expression = ellipse(32165.610200, 43300.231400, 464.901013, 464.901013, 0.000000, X, Y)
[Mon May  6 07:51:12 2013] Writing source region out to fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2_src.reg
[Mon May  6 07:51:12 2013] Extracting stamp from image fullrun_mos1_xmm0056020901_pi300-10000_cl_sm2.00.img.gz, (344, 472) - (397, 525)
[Mon May  6 07:51:12 2013] XMMSAS bgd. selection expression = annulus(32165.610200, 43300.231400, 774.835022, 1549.670045, X, Y) && !ellipse(34249.375960, 41188.935200, 788.976823, 258.827207, 18.530346, X, Y)
[Mon May  6 07:51:12 2013] Writing fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2.gif
[Mon May  6 07:55:15 2013] Mean detx,y = (9371.46, 13630.84) 
[Mon May  6 07:55:16 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 07:55:29 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 07:55:29 2013] Setting source spectrum file to fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May  6 07:55:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May  6 08:04:29 2013] Not generating rmf since there are only 44 counts
[Mon May  6 08:04:29 2013] rmf not generated due to insufficient counts
[Mon May  6 08:20:16 2013] Updating aperture counts using extracted products
[Mon May  6 08:20:16 2013] Total counts from fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 67.00
[Mon May  6 08:20:16 2013] Total counts from fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2_bgd.pi.gz = 143.00
[Mon May  6 08:20:16 2013] Got source and background scale factors 680000.000000, 3666624.000000
[Mon May  6 08:20:16 2013] User source parameters:
  Position = (370.3, 498.3) = 12 41 8.07 33 3 9.2
  Extent = 7.7 (5.3-10.6)", rotation angle = 0
  Source aperture counts = 40.5 +/- 9.2
  Background aperture counts = 26.5
  Rate = 0.002 +/- 0.0004

[Mon May  6 08:20:17 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 08:20:17 2013] Using photon index=1.80, rate=0.00191, arf fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2.arf
[Mon May  6 08:20:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 08:20:17 2013] Updating source flux to 5e-14
[Mon May  6 08:20:22 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May  6 08:20:24 2013] xmm0056020901/analysis//spectral/fullrun_mos1_xmm0056020901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete