[Sat Jun 22 18:20:06 2013] Detection parameters:
  Position = (334.6, 337.0) = 2 56 27.40 0 7 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.6 +/- 17.9
  Background counts = 87.1
  Rate = 0.007 +/- 0.001

[Sat Jun 22 18:20:06 2013] Off-axis axis estimate = 3.83'
[Sat Jun 22 18:22:43 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 18:22:43 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sat Jun 22 18:22:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Sat Jun 22 18:22:43 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.35"
[Sat Jun 22 19:11:41 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun 22 19:11:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 19:11:41 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun 22 19:11:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 19:11:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 19:11:42 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun 22 19:11:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 22 19:11:42 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun 22 19:11:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 22 19:11:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:08 2013] Source 13 is offset by -4.549218 and -8.698989 pixels which is larger than
2 X fitted extent = 1.572990 x 1.572990, not incorporating fit results
[Sat Jun 22 20:32:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:32:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:32:08 2013] Assessing source extent using major
[Sat Jun 22 20:32:08 2013] Source does appear to be extended
[Sat Jun 22 20:32:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 20:32:25 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 20:32:25 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sat Jun 22 20:32:25 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Sat Jun 22 20:32:25 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 8.35"
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jun 22 21:19:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src13.csv
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jun 22 21:19:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src13.csv
[Sat Jun 22 21:19:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jun 22 21:19:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jun 22 21:19:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat Jun 22 21:19:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 22:34:11 2013] Source 13 is offset by -4.582597 and -8.681196 pixels which is larger than
2 X fitted extent = 1.547536 x 1.547536, not incorporating fit results
[Sat Jun 22 22:34:11 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 22:34:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 22:34:11 2013] Assessing source extent using major
[Sat Jun 22 22:34:11 2013] Source does appear to be extended
[Sat Jun 22 22:34:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 22:34:27 2013] XMMSAS src. selection expression = ellipse(29065.760071, 29267.921967, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 22:34:27 2013] Writing source region out to fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 22 22:34:27 2013] Extracting stamp from image fullrun_pn_xmm0056020301_pi300-10000_cl_sm2.00.img.gz, (297, 299) - (372, 374)
[Sat Jun 22 22:34:27 2013] XMMSAS bgd. selection expression = annulus(29065.760071, 29267.921967, 1087.500000, 2175.000000, X, Y) && !ellipse(27122.090000, 27604.711600, 1411.080041, 1146.712033, 94.921440, X, Y) && !ellipse(28079.942800, 27211.877800, 1196.000034, 678.172020, 5.341470, X, Y) && !ellipse(26913.070282, 28763.145142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29345.236000, 26046.092000, 1228.816035, 1228.816035, 0.000000, X, Y) && !ellipse(27061.178600, 26256.678000, 1106.360032, 1106.360032, 0.000000, X, Y)
[Sat Jun 22 22:34:27 2013] Writing fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13.gif
[Sat Jun 22 22:39:10 2013] Mean detx,y = (1223.29, -2391.16) 
[Sat Jun 22 22:39:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 22:39:37 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 22:39:37 2013] Setting source spectrum file to fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 22 22:39:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 22 22:57:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 22:57:54 2013] rmf not generated due to insufficient counts
[Sat Jun 22 23:32:14 2013] Updating aperture counts using extracted products
[Sat Jun 22 23:32:14 2013] Total counts from fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 172.00
[Sat Jun 22 23:32:14 2013] Total counts from fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 440.00
[Sat Jun 22 23:32:14 2013] Got source and background scale factors 1298298.000000, 7183176.000000
[Sat Jun 22 23:32:14 2013] User source parameters:
  Position = (334.6, 337.0) = 2 56 27.40 0 7 49.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.5 +/- 14.1
  Background aperture counts = 79.5
  Rate = 0.009 +/- 0.001

[Sat Jun 22 23:32:14 2013] Updating counts from extracted products
[Sat Jun 22 23:32:14 2013] Set source signif. to 92.47/8.92 = 10.37
[Sat Jun 22 23:32:17 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 23:32:17 2013] Using photon index=1.80, rate=0.00934, arf fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13.arf
[Sat Jun 22 23:32:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 23:32:17 2013] Updating source flux to 3.1e-14
[Sat Jun 22 23:32:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 23:32:31 2013] xmm0056020301/analysis//spectral/fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete