[Sat Jun 22 18:20:06 2013] Detection parameters:
  Position = (253.9, 416.4) = 2 56 50.80 0 13 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.5 +/- 16.1
  Background counts = 73.2
  Rate = 0.004 +/- 0.0008

[Sat Jun 22 18:20:06 2013] Off-axis axis estimate = 9.14'
[Sat Jun 22 18:22:43 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 18:22:43 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Sat Jun 22 18:22:43 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Sat Jun 22 18:22:43 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.00"
[Sat Jun 22 19:11:41 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 22 19:11:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 19:11:41 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 22 19:11:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 19:11:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 19:11:42 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 22 19:11:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 22 19:11:42 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 22 19:11:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 22 19:11:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:08 2013] Source 10 is offset by 9.053400 and 1.516375 pixels which is larger than
2 X fitted extent = 1.265200 x 1.265200, not incorporating fit results
[Sat Jun 22 20:32:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:32:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:32:08 2013] Assessing source extent using major
[Sat Jun 22 20:32:08 2013] Source does appear to be extended
[Sat Jun 22 20:32:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 20:32:25 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 20:32:25 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Sat Jun 22 20:32:25 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Sat Jun 22 20:32:25 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.00"
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 22 21:19:05 2013] Fit fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 22 21:19:05 2013] fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 22 21:19:05 2013] Fit fullrun_pn_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 22 22:34:11 2013] Spatial fit model total counts = 134.569000, observed total counts = 131.000000
[Sat Jun 22 22:34:11 2013] Offset between fit and detection position for source 10 = 0.383864 pixels
[Sat Jun 22 22:34:11 2013] 134.006400 total counts/ 97.688900 bgd. counts: snr = 3.674458
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.383864 pixels
  Position = (253.6, 416.5) = 2 56 50.91 0 13 33.5
  Extent = 5.4 (3.3-8.0)", rotation angle = 0
  Source counts = 36.3 +/- 11.6
  Background counts = 97.7
  Rate = 0.004 +/- 0.001
[Sat Jun 22 22:34:11 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 22:34:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 22:34:11 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 22:34:11 2013] Source does appear to be extended
[Sat Jun 22 22:34:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 22:34:27 2013] XMMSAS src. selection expression = ellipse(22012.779000, 36190.557400, 326.935809, 326.935809, 0.000000, X, Y)
[Sat Jun 22 22:34:27 2013] Writing source region out to fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 22 22:34:27 2013] Extracting stamp from image fullrun_pn_xmm0056020301_pi300-10000_cl_sm2.00.img.gz, (235, 398) - (272, 435)
[Sat Jun 22 22:34:27 2013] XMMSAS bgd. selection expression = annulus(22012.779000, 36190.557400, 544.893016, 1089.786031, X, Y)
[Sat Jun 22 22:34:27 2013] Writing fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10.gif
[Sat Jun 22 22:38:05 2013] Mean detx,y = (-7029.25, -7750.85) 
[Sat Jun 22 22:38:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 22:38:23 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 22:38:24 2013] Setting source spectrum file to fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 22 22:38:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 22 22:57:31 2013] Not generating rmf since there are only 36 counts
[Sat Jun 22 22:57:31 2013] rmf not generated due to insufficient counts
[Sat Jun 22 23:32:13 2013] Updating aperture counts using extracted products
[Sat Jun 22 23:32:13 2013] Total counts from fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 52.00
[Sat Jun 22 23:32:13 2013] Total counts from fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 99.00
[Sat Jun 22 23:32:13 2013] Got source and background scale factors 344000.000000, 1863681.000000
[Sat Jun 22 23:32:13 2013] User source parameters:
  Position = (253.6, 416.5) = 2 56 50.91 0 13 33.5
  Extent = 5.4 (3.3-8.0)", rotation angle = 0
  Source aperture counts = 33.7 +/- 8.3
  Background aperture counts = 18.3
  Rate = 0.003 +/- 0.0008

[Sat Jun 22 23:32:17 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 23:32:17 2013] Using photon index=1.80, rate=0.00367, arf fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10.arf
[Sat Jun 22 23:32:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 23:32:17 2013] Updating source flux to 2.4e-14
[Sat Jun 22 23:32:28 2013] Flag b found in src. 10 procflags, skipping spectral fitting
[Sat Jun 22 23:32:28 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 23:32:31 2013] xmm0056020301/analysis//spectral/fullrun_pn_xmm0056020301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete