[Sat Jun 22 18:20:57 2013] Detection parameters:
  Position = (252.2, 130.3) = 2 56 51.31 -0 7 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 13.2
  Background counts = 22.2
  Rate = 0.003 +/- 0.0006

[Sat Jun 22 18:20:57 2013] Off-axis axis estimate = 12.64'
[Sat Jun 22 19:42:25 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 19:42:25 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Sat Jun 22 19:42:25 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.041
[Sat Jun 22 19:42:25 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.75"
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jun 22 20:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src16.csv
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jun 22 20:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src16.csv
[Sat Jun 22 20:32:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:02 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jun 22 20:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 22 20:32:02 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jun 22 20:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 22 20:32:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:16 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 17.168899 pixels away
[Sat Jun 22 20:32:16 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:32:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:32:16 2013] Assessing source extent using major
[Sat Jun 22 20:32:16 2013] Source does appear to be extended
[Sat Jun 22 20:32:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 21:47:51 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 21:47:51 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Sat Jun 22 21:47:51 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.041
[Sat Jun 22 21:47:51 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.75"
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun 22 22:34:04 2013] Fit fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src15 appears to have run properly
[Sat Jun 22 22:34:05 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun 22 22:34:05 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun 22 22:34:05 2013] Fit fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jun 22 22:34:19 2013] Spatial fit model total counts = 167.189000, observed total counts = 153.000000
[Sat Jun 22 22:34:19 2013] Offset between fit and detection position for source 27 = 0.147624 pixels
[Sat Jun 22 22:34:19 2013] 166.955600 total counts/ 133.536000 bgd. counts: snr = 2.892025
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.147624 pixels
  Position = (252.3, 130.2) = 2 56 51.29 -0 7 12.0
  Extent = 5.8 (3.2-8.4)", rotation angle = 0
  Source counts = 33.4 +/- 12.9
  Background counts = 133.5
  Rate = 0.002 +/- 0.0006
[Sat Jun 22 22:34:19 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 22:34:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 22:34:19 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 22:34:19 2013] Source does appear to be extended
[Sat Jun 22 22:34:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 23:19:21 2013] XMMSAS src. selection expression = ellipse(21898.811800, 11281.505600, 346.716610, 346.716610, 0.000000, X, Y)
[Sat Jun 22 23:19:21 2013] Writing source region out to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun 22 23:19:21 2013] Extracting stamp from image fullrun_mos2_xmm0056020301_pi300-10000_cl_sm2.00.img.gz, (232, 110) - (272, 150)
[Sat Jun 22 23:19:21 2013] XMMSAS bgd. selection expression = annulus(21898.811800, 11281.505600, 577.861017, 1155.722033, X, Y)
[Sat Jun 22 23:19:21 2013] Writing fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27.gif
[Sat Jun 22 23:22:39 2013] Mean detx,y = (1939.83, -16755.33) 
[Sat Jun 22 23:22:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 23:22:51 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 23:22:51 2013] Setting source spectrum file to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jun 22 23:22:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun 22 23:30:42 2013] Not generating rmf since there are only 33 counts
[Sat Jun 22 23:30:42 2013] rmf not generated due to insufficient counts
[Sat Jun 22 23:32:22 2013] Updating aperture counts using extracted products
[Sat Jun 22 23:32:22 2013] Total counts from fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 52.00
[Sat Jun 22 23:32:22 2013] Total counts from fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 142.00
[Sat Jun 22 23:32:22 2013] Got source and background scale factors 376000.000000, 2291212.000000
[Sat Jun 22 23:32:22 2013] User source parameters:
  Position = (252.3, 130.2) = 2 56 51.29 -0 7 12.0
  Extent = 5.8 (3.2-8.4)", rotation angle = 0
  Source aperture counts = 28.7 +/- 8.3
  Background aperture counts = 23.3
  Rate = 0.001 +/- 0.0004

[Sat Jun 22 23:32:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 23:32:24 2013] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27.arf
[Sat Jun 22 23:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 23:32:24 2013] Updating source flux to 6.2e-14
[Sat Jun 22 23:32:27 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 23:32:28 2013] xmm0056020301/analysis//spectral/fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete