[Sat Jun 22 18:20:56 2013] Detection parameters:
  Position = (324.8, 311.2) = 2 56 30.26 0 5 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.1 +/- 19.4
  Background counts = 41.8
  Rate = 0.01 +/- 0.0009

[Sat Jun 22 18:20:57 2013] Off-axis axis estimate = 2.12'
[Sat Jun 22 19:42:25 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 19:42:25 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Sat Jun 22 19:42:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.608
[Sat Jun 22 19:42:25 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.49"
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 22 20:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src4.csv
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 22 20:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src4.csv
[Sat Jun 22 20:32:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 22 20:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 22 20:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 22 20:32:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:16 2013] Spatial fit model total counts = 930.568000, observed total counts = 818.000000
[Sat Jun 22 20:32:16 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 20:32:16 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:32:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:32:16 2013] Assessing source extent using major
[Sat Jun 22 20:32:16 2013] Source does appear to be extended
[Sat Jun 22 20:32:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 20:32:16 2013] Source is confused with source 3
[Sat Jun 22 20:32:16 2013] Source is confused with source 19
[Sat Jun 22 21:47:51 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 21:47:51 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Sat Jun 22 21:47:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.608
[Sat Jun 22 21:47:51 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.49"
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 22 22:34:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 22 22:34:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 22:34:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 22 22:34:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 22 22:34:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 22:34:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 22:34:19 2013] Spatial fit model total counts = 928.222000, observed total counts = 818.000000
[Sat Jun 22 22:34:19 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 22:34:19 2013] Spatial fit model total counts = 675.096000, observed total counts = 560.000000
[Sat Jun 22 22:34:19 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 22:34:19 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 22:34:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 22:34:19 2013] Assessing source extent using major
[Sat Jun 22 22:34:19 2013] Source does appear to be extended
[Sat Jun 22 22:34:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 23:19:21 2013] XMMSAS src. selection expression = ellipse(28207.482025, 27027.587006, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 23:19:21 2013] Writing source region out to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 22 23:19:21 2013] Extracting stamp from image fullrun_mos2_xmm0056020301_pi300-10000_cl_sm2.00.img.gz, (287, 274) - (362, 349)
[Sat Jun 22 23:19:21 2013] XMMSAS bgd. selection expression = annulus(28207.482025, 27027.587006, 1087.500000, 2175.000000, X, Y) && !ellipse(27362.975200, 27063.342800, 1148.744033, 413.694412, 94.066710, X, Y) && !ellipse(26749.536407, 26233.154449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28932.410800, 29177.774060, 1118.872032, 604.497617, 225.529000, X, Y) && !ellipse(30655.209880, 27303.525200, 519.980015, 274.416808, 57.385700, X, Y) && !ellipse(28710.238000, 27189.831400, 1255.032036, 190.412005, 0.670105, X, Y)
[Sat Jun 22 23:19:21 2013] Writing fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2.gif
[Sat Jun 22 23:19:52 2013] Mean detx,y = (-764.59, -11.63) 
[Sat Jun 22 23:19:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 23:20:02 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 23:20:02 2013] Setting source spectrum file to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 22 23:20:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 22 23:29:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 23:29:32 2013] rmf not generated due to insufficient counts
[Sat Jun 22 23:32:20 2013] Updating aperture counts using extracted products
[Sat Jun 22 23:32:20 2013] Total counts from fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 530.00
[Sat Jun 22 23:32:20 2013] Total counts from fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1410.00
[Sat Jun 22 23:32:21 2013] Got source and background scale factors 1141956.000000, 7635288.000000
[Sat Jun 22 23:32:21 2013] User source parameters:
  Position = (324.8, 311.2) = 2 56 30.26 0 5 57.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 319.1 +/- 24.0
  Background aperture counts = 210.9
  Rate = 0.02 +/- 0.001

[Sat Jun 22 23:32:21 2013] Updating counts from extracted products
[Sat Jun 22 23:32:21 2013] Set source signif. to 319.12/14.52 = 21.97
[Sat Jun 22 23:32:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 23:32:24 2013] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2.arf
[Sat Jun 22 23:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 23:32:24 2013] Updating source flux to 1.7e-13
[Sat Jun 22 23:32:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 23:32:28 2013] xmm0056020301/analysis//spectral/fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete