[Sat Jun 22 18:20:56 2013] Detection parameters:
  Position = (334.7, 312.9) = 2 56 27.38 0 6 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 12.5
  Background counts = 42.2
  Rate = 0.002 +/- 0.0005

[Sat Jun 22 18:20:57 2013] Off-axis axis estimate = 2.83'
[Sat Jun 22 19:42:25 2013] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 19:42:25 2013] Initial guess for spatial extent in simple fitting = 7.84"
[Sat Jun 22 19:42:25 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Sat Jun 22 19:42:25 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.84"
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jun 22 20:32:01 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jun 22 20:32:01 2013] Fit fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat Jun 22 20:32:02 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jun 22 20:32:02 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jun 22 20:32:02 2013] Fit fullrun_mos2_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Jun 22 20:32:16 2013] Spatial fit model total counts = 407.748000, observed total counts = 408.000000
[Sat Jun 22 20:32:16 2013] Offset between fit and detection position for source 19 = 4.166853 pixels
[Sat Jun 22 20:32:16 2013] 381.106500 total counts/ 344.162000 bgd. counts: snr = 1.991445
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.166853 pixels
  Position = (330.6, 313.1) = 2 56 28.58 0 6 3.4
  Extent = 15.7 (15.6-31.4)" x 2.4 (2.0-5.1)", rotation angle = 1 (354-8) degrees
  Source counts = 36.9 +/- 19.5
  Background counts = 344.2
  Rate = 0.002 +/- 0.001
[Sat Jun 22 20:32:16 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:32:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:32:16 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 20:32:16 2013] Source does appear to be extended
[Sat Jun 22 20:32:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.07
[Sat Jun 22 20:32:16 2013] Source is asymmetric
[Sat Jun 22 20:32:16 2013] Source is confused with source 2
[Sat Jun 22 21:47:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 21:47:51 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Sat Jun 22 21:47:51 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.941
[Sat Jun 22 21:47:51 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.03"
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 22 22:34:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 22:34:04 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 22 22:34:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 22:34:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 22:34:05 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 22 22:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jun 22 22:34:05 2013] fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 22 22:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jun 22 22:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 22:34:19 2013] Warning, spatial fit 25 centroid is now closest to src. 2
[Sat Jun 22 22:34:19 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 22:34:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 22:34:19 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 22:34:19 2013] Source does appear to be extended
[Sat Jun 22 22:34:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.07
[Sat Jun 22 22:34:19 2013] Source is asymmetric
[Sat Jun 22 23:19:21 2013] XMMSAS src. selection expression = ellipse(28710.238000, 27189.831400, 941.274027, 142.809004, 0.670105, X, Y)
[Sat Jun 22 23:19:21 2013] Writing source region out to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun 22 23:19:21 2013] Extracting stamp from image fullrun_mos2_xmm0056020301_pi300-10000_cl_sm2.00.img.gz, (276, 259) - (385, 367)
[Sat Jun 22 23:19:21 2013] XMMSAS bgd. selection expression = annulus(28710.238000, 27189.831400, 1568.790045, 3137.580090, X, Y) && !ellipse(27362.975200, 27063.342800, 1148.744033, 413.694412, 94.066710, X, Y) && !ellipse(28207.482025, 27027.587006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26749.536407, 26233.154449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28932.410800, 29177.774060, 1118.872032, 604.497617, 225.529000, X, Y) && !ellipse(30655.209880, 27303.525200, 519.980015, 274.416808, 57.385700, X, Y)
[Sat Jun 22 23:19:21 2013] Writing fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19.gif
[Sat Jun 22 23:25:08 2013] Mean detx,y = (-1112.35, 188.59) 
[Sat Jun 22 23:25:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 23:25:19 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 23:25:19 2013] Setting source spectrum file to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun 22 23:25:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jun 22 23:31:31 2013] Not generating rmf since there are only 36 counts
[Sat Jun 22 23:31:31 2013] rmf not generated due to insufficient counts
[Sat Jun 22 23:32:23 2013] Updating aperture counts using extracted products
[Sat Jun 22 23:32:23 2013] Total counts from fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 178.00
[Sat Jun 22 23:32:24 2013] Total counts from fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 2249.00
[Sat Jun 22 23:32:24 2013] Got source and background scale factors 382308.000000, 17693412.000000
[Sat Jun 22 23:32:24 2013] User source parameters:
  Position = (330.6, 313.1) = 2 56 28.58 0 6 3.4
  Extent = 15.7 (15.6-31.4)" x 2.4 (2.0-5.1)", rotation angle = 1 (354-8) degrees
  Source aperture counts = 129.4 +/- 14.4
  Background aperture counts = 48.6
  Rate = 0.006 +/- 0.0007

[Sat Jun 22 23:32:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 23:32:24 2013] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19.arf
[Sat Jun 22 23:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 23:32:24 2013] Updating source flux to 2.6e-14
[Sat Jun 22 23:32:27 2013] Flag c found in src. 19 procflags, skipping spectral fitting
[Sat Jun 22 23:32:27 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 23:32:28 2013] xmm0056020301/analysis//spectral/fullrun_mos2_xmm0056020301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete