[Sat Jun 22 18:20:28 2013] Detection parameters:
  Position = (135.0, 246.9) = 2 57 25.29 0 1 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 13.4
  Background counts = 19.7
  Rate = 0.004 +/- 0.0006

[Sat Jun 22 18:20:29 2013] Off-axis axis estimate = 12.42'
[Sat Jun 22 19:11:42 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 19:11:42 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Sat Jun 22 19:11:42 2013] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.776
[Sat Jun 22 19:11:42 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 12.64"
[Sat Jun 22 19:42:25 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 22 19:42:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_src17.csv
[Sat Jun 22 19:42:25 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 22 19:42:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_src17.csv
[Sat Jun 22 19:42:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 19:42:25 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 22 19:42:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 22 19:42:25 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 22 19:42:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 22 19:42:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056020301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 20:32:11 2013] Spatial fit model total counts = 148.607000, observed total counts = 134.000000
[Sat Jun 22 20:32:11 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 20:32:11 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 20:32:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 20:32:11 2013] Assessing source extent using major
[Sat Jun 22 20:32:11 2013] Source does appear to be extended
[Sat Jun 22 20:32:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 21:19:05 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 21:19:05 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Sat Jun 22 21:19:05 2013] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.776
[Sat Jun 22 21:19:05 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.64"
[Sat Jun 22 21:47:50 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun 22 21:47:50 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun 22 21:47:50 2013] Fit fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_src15 appears to have run properly
[Sat Jun 22 21:47:51 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun 22 21:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun 22 21:47:51 2013] fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun 22 21:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun 22 21:47:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056020301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 22:34:14 2013] Spatial fit model total counts = 146.880000, observed total counts = 134.000000
[Sat Jun 22 22:34:14 2013] Offset between fit and detection position for source 3 = 1.535949 pixels
[Sat Jun 22 22:34:14 2013] 149.623500 total counts/ 97.306300 bgd. counts: snr = 5.303640
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.535949 pixels
  Position = (135.6, 245.5) = 2 57 25.11 0 1 9.6
  Extent = 12.7 (9.4-17.6)", rotation angle = 67 (61-76) degrees
  Source counts = 52.3 +/- 12.2
  Background counts = 97.3
  Rate = 0.003 +/- 0.0006
[Sat Jun 22 22:34:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 22:34:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 22:34:14 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 22:34:14 2013] Source does appear to be extended
[Sat Jun 22 22:34:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.16
[Sat Jun 22 22:34:14 2013] Source is asymmetric
[Sat Jun 22 23:00:50 2013] XMMSAS src. selection expression = ellipse(11752.631600, 21312.835200, 760.728022, 189.604805, 67.345448, X, Y)
[Sat Jun 22 23:00:50 2013] Writing source region out to fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 22 23:00:50 2013] Extracting stamp from image fullrun_mos1_xmm0056020301_pi300-10000_cl_sm2.00.img.gz, (92, 202) - (179, 289)
[Sat Jun 22 23:00:50 2013] XMMSAS bgd. selection expression = annulus(11752.631600, 21312.835200, 1267.880036, 2535.760073, X, Y)
[Sat Jun 22 23:00:50 2013] Writing fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3.gif
[Sat Jun 22 23:04:18 2013] Mean detx,y = (-8865.40, -14228.47) 
[Sat Jun 22 23:04:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 23:04:37 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 23:04:37 2013] Setting source spectrum file to fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 22 23:04:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 22 23:18:43 2013] Not generating rmf since there are only 52 counts
[Sat Jun 22 23:18:43 2013] rmf not generated due to insufficient counts
[Sat Jun 22 23:32:19 2013] Updating aperture counts using extracted products
[Sat Jun 22 23:32:19 2013] Total counts from fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 53.00
[Sat Jun 22 23:32:19 2013] Total counts from fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 382.00
[Sat Jun 22 23:32:19 2013] Got source and background scale factors 431984.000000, 8030032.000000
[Sat Jun 22 23:32:19 2013] User source parameters:
  Position = (135.6, 245.5) = 2 57 25.11 0 1 9.6
  Extent = 12.7 (9.4-17.6)", rotation angle = 67 (61-76) degrees
  Source aperture counts = 32.4 +/- 8.3
  Background aperture counts = 20.6
  Rate = 0.002 +/- 0.0004

[Sat Jun 22 23:32:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 23:32:20 2013] Using photon index=1.80, rate=0.00266, arf fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3.arf
[Sat Jun 22 23:32:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 23:32:20 2013] Updating source flux to 1.2e-13
[Sat Jun 22 23:32:25 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat Jun 22 23:32:25 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 23:32:27 2013] xmm0056020301/analysis//spectral/fullrun_mos1_xmm0056020301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete