[Sun Jun 16 06:38:27 2013] Detection parameters:
  Position = (119.1, 357.1) = 13 39 30.94 48 19 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.0 +/- 15.6
  Background counts = 24.1
  Rate = 0.007 +/- 0.0009

[Sun Jun 16 06:38:30 2013] Off-axis axis estimate = 13.68'
[Sun Jun 16 06:39:06 2013] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 06:39:06 2013] Initial guess for spatial extent in simple fitting = 13.27"
[Sun Jun 16 06:39:06 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.972
[Sun Jun 16 06:39:06 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.27"
[Sun Jun 16 06:39:06 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 16 06:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 16 06:39:06 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 16 06:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 16 06:39:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 16 06:39:07 2013] Fit fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 16 06:39:24 2013] Spatial fit model total counts = 295.544000, observed total counts = 285.000000
[Sun Jun 16 06:39:24 2013] Offset between fit and detection position for source 6 = 0.457739 pixels
[Sun Jun 16 06:39:24 2013] 291.183000 total counts/ 168.834000 bgd. counts: snr = 9.416087
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.457739 pixels
  Position = (119.5, 357.4) = 13 39 30.78 48 19 16.8
  Extent = 9.1 (6.4-11.4)", rotation angle = 0
  Source counts = 122.3 +/- 17.1
  Background counts = 168.8
  Rate = 0.008 +/- 0.001
[Sun Jun 16 06:39:24 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:24 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:39:24 2013] Source does appear to be extended
[Sun Jun 16 06:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:54 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Sun Jun 16 06:39:54 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Sun Jun 16 06:39:54 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.09"
[Sun Jun 16 06:39:54 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 16 06:39:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src5.csv
[Sun Jun 16 06:39:54 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 16 06:39:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src5.csv
[Sun Jun 16 06:39:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 16 06:39:55 2013] Fit fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 16 06:40:09 2013] Spatial fit model total counts = 248.358000, observed total counts = 236.000000
[Sun Jun 16 06:40:09 2013] Offset between fit and detection position for source 6 = 0.261041 pixels
[Sun Jun 16 06:40:09 2013] 249.142100 total counts/ 151.493000 bgd. counts: snr = 7.933630
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.261041 pixels
  Position = (119.2, 357.3) = 13 39 30.89 48 19 16.4
  Extent = 7.3 (5.1-10.5)", rotation angle = 0
  Source counts = 97.6 +/- 15.8
  Background counts = 151.5
  Rate = 0.006 +/- 0.001
[Sun Jun 16 06:40:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:09 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:40:09 2013] Source does appear to be extended
[Sun Jun 16 06:40:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:40 2013] XMMSAS src. selection expression = ellipse(10324.275580, 31032.673400, 437.259013, 437.259013, 0.000000, X, Y)
[Sun Jun 16 06:40:40 2013] Not overwriting source region fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 16 06:40:40 2013] Extracting stamp from image fullrun_pn_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (94, 332) - (144, 382)
[Sun Jun 16 06:40:40 2013] XMMSAS bgd. selection expression = annulus(10324.275580, 31032.673400, 728.765021, 1457.530042, X, Y) && !ellipse(11610.054901, 29529.110474, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 06:40:40 2013] Writing fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6.gif
[Sun Jun 16 06:40:40 2013] ../../xmm0055990501/products/events/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0055990501/products/events/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:41 2013] Mean detx,y = (-3562.31, -14733.67) 
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/images/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src.img and ../../xmm0055990501/products/images/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/spectra/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:41 2013] Setting source spectrum file to fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 16 06:40:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/lightcurves/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Jun 16 06:40:51 2013] Not generating rmf since there are only 97 counts
[Sun Jun 16 06:40:51 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:40:51 2013] fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Sun Jun 16 06:56:43 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:56:43 2013] Total counts from fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 150.00
[Sun Jun 16 06:56:43 2013] Total counts from fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.pi.gz = 240.00
[Sun Jun 16 06:56:43 2013] Got source and background scale factors 608000.000000, 3483356.000000
[Sun Jun 16 06:56:43 2013] User source parameters:
  Position = (119.2, 357.3) = 13 39 30.89 48 19 16.4
  Extent = 7.3 (5.1-10.5)", rotation angle = 0
  Source aperture counts = 108.1 +/- 13.3
  Background aperture counts = 41.9
  Rate = 0.007 +/- 0.0009

[Sun Jun 16 06:56:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:56:53 2013] Using photon index=1.80, rate=0.00626, arf fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6.arf
[Sun Jun 16 06:56:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:56:53 2013] Updating source flux to 5.3e-14
[Sun Jun 16 06:57:24 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 06:57:31 2013] xmm0055990501/analysis//spectral/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete