[Sun Jun 16 06:38:29 2013] Detection parameters:
  Position = (392.0, 211.7) = 13 37 32.05 48 8 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.5 +/- 10.2
  Background counts = 26.6
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 06:38:30 2013] Off-axis axis estimate = 9.25'
[Sun Jun 16 06:39:06 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:06 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Sun Jun 16 06:39:06 2013] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.865
[Sun Jun 16 06:39:06 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 11.05"
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src34.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src34.csv
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src34.csv
[Sun Jun 16 06:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Jun 16 06:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:24 2013] Spatial fit model total counts = 898.690000, observed total counts = 895.000000
[Sun Jun 16 06:39:24 2013] Offset between fit and detection position for source 35 = 9.017679 pixels
[Sun Jun 16 06:39:24 2013] Warning, changing simple spatial fit ID from 34 to 3
[Sun Jun 16 06:39:24 2013] 875.765015 total counts/ 875.765000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 9.017679 pixels
  Position = (383.0, 211.0) = 13 37 35.96 48 8 41.6
  Extent = 21.8 (2.7-40.9)", rotation angle = 0
  Source counts = 0.0 +/- 29.6
  Background counts = 875.8
  Rate = 1e-09 +/- 0.002
  Deleting source due to low Poisson probability