[Sun Jun 16 06:38:29 2013] Detection parameters:
  Position = (412.5, 358.8) = 13 37 22.96 48 19 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.2 +/- 10.8
  Background counts = 24.5
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 06:38:30 2013] Off-axis axis estimate = 9.36'
[Sun Jun 16 06:39:06 2013] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:06 2013] Initial guess for spatial extent in simple fitting = 11.11"
[Sun Jun 16 06:39:06 2013] source mask rpix=2.6, npix_max = 37, mask sum = 40, frac = 1.073
[Sun Jun 16 06:39:06 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.11"
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src26.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src26.csv
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src26.csv
[Sun Jun 16 06:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Jun 16 06:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:24 2013] Spatial fit model total counts = 145.870000, observed total counts = 119.000000
[Sun Jun 16 06:39:24 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:39:24 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:24 2013] Assessing source extent using major
[Sun Jun 16 06:39:24 2013] Source does appear to be extended
[Sun Jun 16 06:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:54 2013] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:54 2013] Initial guess for spatial extent in simple fitting = 11.11"
[Sun Jun 16 06:39:54 2013] source mask rpix=2.6, npix_max = 37, mask sum = 40, frac = 1.073
[Sun Jun 16 06:39:54 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.11"
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src25.csv
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src25.csv
[Sun Jun 16 06:39:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jun 16 06:39:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:40:09 2013] Source 27 is offset by -7.067527 and 6.369010 pixels which is larger than
2 X fitted extent = 0.951457 x 0.951457, not incorporating fit results
[Sun Jun 16 06:40:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:09 2013] Assessing source extent using major
[Sun Jun 16 06:40:09 2013] Source does appear to be extended
[Sun Jun 16 06:40:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:40 2013] XMMSAS src. selection expression = ellipse(35842.839172, 31163.389862, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 06:40:40 2013] Not overwriting source region fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 16 06:40:40 2013] Extracting stamp from image fullrun_pn_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (375, 321) - (450, 396)
[Sun Jun 16 06:40:40 2013] XMMSAS bgd. selection expression = annulus(35842.839172, 31163.389862, 1087.500000, 2175.000000, X, Y) && !ellipse(34951.537872, 32737.508942, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 06:40:40 2013] Writing fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27.gif
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/events/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0055990501/products/events/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:41 2013] Mean detx,y = (8091.46, 7918.57) 
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/images/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src.img and ../../xmm0055990501/products/images/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/spectra/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:41 2013] Setting source spectrum file to fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 16 06:40:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/lightcurves/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun Jun 16 06:40:51 2013] Not generating rmf since there are only 54 counts
[Sun Jun 16 06:40:51 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:40:51 2013] fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Sun Jun 16 06:56:50 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:56:50 2013] Total counts from fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 96.00
[Sun Jun 16 06:56:50 2013] Total counts from fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_bgd.pi.gz = 633.00
[Sun Jun 16 06:56:50 2013] Got source and background scale factors 913708.000000, 8676607.000000
[Sun Jun 16 06:56:50 2013] User source parameters:
  Position = (412.5, 358.8) = 13 37 22.96 48 19 24.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.3 +/- 10.8
  Background aperture counts = 66.7
  Rate = 0.002 +/- 0.0007

[Sun Jun 16 06:56:50 2013] Updating counts from extracted products
[Sun Jun 16 06:56:50 2013] Set source signif. to 29.34/8.16 = 3.59
[Sun Jun 16 06:56:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:56:54 2013] Using photon index=1.80, rate=0.00188, arf fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27.arf
[Sun Jun 16 06:56:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:56:54 2013] Updating source flux to 9.8e-15
[Sun Jun 16 06:57:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 06:57:31 2013] xmm0055990501/analysis//spectral/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete