[Sun Jun 16 06:38:29 2013] Detection parameters:
  Position = (317.2, 381.3) = 13 38 4.54 48 21 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 14.1
  Background counts = 33.1
  Rate = 0.006 +/- 0.001

[Sun Jun 16 06:38:30 2013] Off-axis axis estimate = 6.16'
[Sun Jun 16 06:39:06 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:06 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Sun Jun 16 06:39:06 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.867
[Sun Jun 16 06:39:06 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 9.51"
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src24.csv
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 16 06:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src24.csv
[Sun Jun 16 06:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 16 06:39:07 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 16 06:39:07 2013] Fit fullrun_pn_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Jun 16 06:39:24 2013] Spatial fit model total counts = 347.885000, observed total counts = 307.000000
[Sun Jun 16 06:39:24 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:39:24 2013] Spatial fit model total counts = 364.374000, observed total counts = 339.000000
[Sun Jun 16 06:39:24 2013] Offset between fit and detection position for source 25 = 1.989024 pixels
[Sun Jun 16 06:39:24 2013] 343.896000 total counts/ 189.589000 bgd. counts: snr = 11.206734
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.989024 pixels
  Position = (315.4, 382.0) = 13 38 5.35 48 21 5.7
  Extent = 14.2 (10.4-19.0)", rotation angle = 0
  Source counts = 154.3 +/- 18.5
  Background counts = 189.6
  Rate = 0.01 +/- 0.001
[Sun Jun 16 06:39:24 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:24 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:39:24 2013] Source does appear to be extended
[Sun Jun 16 06:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:24 2013] Source is confused with source 20
[Sun Jun 16 06:39:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:54 2013] Initial guess for spatial extent in simple fitting = 14.18"
[Sun Jun 16 06:39:54 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.990
[Sun Jun 16 06:39:54 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 14.18"
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src23.csv
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src23.csv
[Sun Jun 16 06:39:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun 16 06:39:55 2013] fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun 16 06:39:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun 16 06:39:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:40:09 2013] Spatial fit model total counts = 460.300000, observed total counts = 416.000000
[Sun Jun 16 06:40:09 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:40:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:09 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:40:09 2013] Source does appear to be extended
[Sun Jun 16 06:40:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:40 2013] XMMSAS src. selection expression = ellipse(27387.320200, 33186.276372, 850.920024, 850.920024, 0.000000, X, Y)
[Sun Jun 16 06:40:40 2013] Not overwriting source region fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src.reg
[Sun Jun 16 06:40:40 2013] Extracting stamp from image fullrun_pn_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (266, 333) - (364, 431)
[Sun Jun 16 06:40:40 2013] XMMSAS bgd. selection expression = annulus(27387.320200, 33186.276372, 1418.200041, 2836.400082, X, Y) && !ellipse(27413.346832, 33469.426178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.053192, 30117.172913, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 06:40:40 2013] Writing fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25.gif
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/events/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0055990501/products/events/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:41 2013] Mean detx,y = (6151.23, -398.01) 
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/images/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src.img and ../../xmm0055990501/products/images/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/spectra/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:41 2013] Setting source spectrum file to fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jun 16 06:40:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jun 16 06:40:41 2013] ../../xmm0055990501/products/lightcurves/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sun Jun 16 06:40:51 2013] fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25.rmf exists, delete to re-create
[Sun Jun 16 06:40:51 2013] fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Sun Jun 16 06:56:49 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:56:49 2013] Total counts from fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 358.00
[Sun Jun 16 06:56:49 2013] Total counts from fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1370.00
[Sun Jun 16 06:56:49 2013] Got source and background scale factors 1979230.000000, 16223975.000000
[Sun Jun 16 06:56:49 2013] User source parameters:
  Position = (315.4, 382.0) = 13 38 5.35 48 21 5.7
  Extent = 14.2 (10.4-19.0)", rotation angle = 0
  Source aperture counts = 190.9 +/- 19.9
  Background aperture counts = 167.1
  Rate = 0.01 +/- 0.001

[Sun Jun 16 06:56:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:56:54 2013] Using photon index=1.80, rate=0.00989, arf fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25.arf
[Sun Jun 16 06:56:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:56:54 2013] Updating source flux to 3.2e-14
[Sun Jun 16 06:57:24 2013] Flag p found in src. 25 procflags, skipping spectral fitting
[Sun Jun 16 06:57:24 2013] Flag c found in src. 25 procflags, skipping spectral fitting
[Sun Jun 16 06:57:31 2013] xmm0055990501/analysis//spectral/fullrun_pn_xmm0055990501_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete