[Sun Jun 16 06:38:33 2013] Detection parameters:
  Position = (348.1, 205.3) = 13 37 51.16 48 8 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.2 +/- 14.5
  Background counts = 10.9
  Rate = 0.01 +/- 0.001

[Sun Jun 16 06:38:35 2013] Off-axis axis estimate = 7.65'
[Sun Jun 16 06:39:09 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:09 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Sun Jun 16 06:39:09 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.103
[Sun Jun 16 06:39:09 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.25"
[Sun Jun 16 06:39:09 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 16 06:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src3.csv
[Sun Jun 16 06:39:09 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 16 06:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src3.csv
[Sun Jun 16 06:39:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 16 06:39:10 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 16 06:39:36 2013] Warning, spatial fit 3 centroid is now closest to src. 21
[Sun Jun 16 06:39:36 2013] Source 6 is offset by 8.887653 and 2.514075 pixels which is larger than
2 X fitted extent = 1.227421 x 1.227421, not incorporating fit results
[Sun Jun 16 06:39:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:36 2013] Assessing source extent using major
[Sun Jun 16 06:39:36 2013] Source does appear to be extended
[Sun Jun 16 06:39:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:56 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:56 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Sun Jun 16 06:39:56 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.103
[Sun Jun 16 06:39:56 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.25"
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 06:39:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 16 06:39:57 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 16 06:40:21 2013] Spatial fit model total counts = 206.837000, observed total counts = 208.000000
[Sun Jun 16 06:40:21 2013] Offset between fit and detection position for source 6 = 0.213230 pixels
[Sun Jun 16 06:40:21 2013] 202.181900 total counts/ 111.878000 bgd. counts: snr = 8.537568
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.213230 pixels
  Position = (348.2, 205.5) = 13 37 51.12 48 8 17.9
  Extent = 5.6 (4.5-6.9)", rotation angle = 0
  Source counts = 90.3 +/- 14.2
  Background counts = 111.9
  Rate = 0.004 +/- 0.0007
[Sun Jun 16 06:40:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:21 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:40:21 2013] Source does appear to be extended
[Sun Jun 16 06:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:57 2013] XMMSAS src. selection expression = ellipse(30241.940300, 17831.707000, 334.265410, 334.265410, 0.000000, X, Y)
[Sun Jun 16 06:40:57 2013] Not overwriting source region fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 16 06:40:57 2013] Extracting stamp from image fullrun_mos2_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (329, 186) - (367, 225)
[Sun Jun 16 06:40:57 2013] XMMSAS bgd. selection expression = annulus(30241.940300, 17831.707000, 557.109016, 1114.218032, X, Y) && !ellipse(30293.891663, 16709.497986, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 06:40:57 2013] Writing fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6.gif
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/events/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0055990501/products/events/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:59 2013] Mean detx,y = (6383.92, -9194.05) 
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/images/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src.img and ../../xmm0055990501/products/images/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/spectra/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:59 2013] Setting source spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 16 06:40:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/lightcurves/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Jun 16 06:48:51 2013] Not generating rmf since there are only 90 counts
[Sun Jun 16 06:48:51 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:57:01 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:57:02 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 112.00
[Sun Jun 16 06:57:02 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_bgd.pi.gz = 85.00
[Sun Jun 16 06:57:02 2013] Got source and background scale factors 348800.000000, 2031132.000000
[Sun Jun 16 06:57:02 2013] User source parameters:
  Position = (348.2, 205.5) = 13 37 51.12 48 8 17.9
  Extent = 5.6 (4.5-6.9)", rotation angle = 0
  Source aperture counts = 97.4 +/- 11.6
  Background aperture counts = 14.6
  Rate = 0.005 +/- 0.0005

[Sun Jun 16 06:57:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:07 2013] Using photon index=1.80, rate=0.00422, arf fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6.arf
[Sun Jun 16 06:57:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:07 2013] Updating source flux to 9.9e-14
[Sun Jun 16 06:57:20 2013] Flag b found in src. 6 procflags, skipping spectral fitting
[Sun Jun 16 06:57:20 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 06:57:24 2013] xmm0055990501/analysis//spectral/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete