[Sun Jun 16 06:38:34 2013] Detection parameters:
  Position = (284.3, 257.0) = 13 38 18.88 48 12 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.2 +/- 9.4
  Background counts = 11.6
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 06:38:35 2013] Off-axis axis estimate = 3.17'
[Sun Jun 16 06:39:09 2013] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:09 2013] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Jun 16 06:39:09 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Sun Jun 16 06:39:09 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.01"
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src19.csv
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src19.csv
[Sun Jun 16 06:39:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 16 06:39:10 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jun 16 06:39:36 2013] Source 20 is offset by -7.080053 and 6.393499 pixels which is larger than
2 X fitted extent = 0.921260 x 0.921260, not incorporating fit results
[Sun Jun 16 06:39:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:36 2013] Assessing source extent using major
[Sun Jun 16 06:39:36 2013] Source does appear to be extended
[Sun Jun 16 06:39:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:56 2013] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:56 2013] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Jun 16 06:39:56 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Sun Jun 16 06:39:56 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.01"
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 16 06:39:57 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Jun 16 06:39:58 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 16 06:39:58 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 16 06:39:58 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Jun 16 06:40:21 2013] Source 20 is offset by 7.660131 and 6.393499 pixels which is larger than
2 X fitted extent = 0.921260 x 0.921260, not incorporating fit results
[Sun Jun 16 06:40:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:21 2013] Assessing source extent using major
[Sun Jun 16 06:40:21 2013] Source does appear to be extended
[Sun Jun 16 06:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:57 2013] XMMSAS src. selection expression = ellipse(24684.733398, 22312.536407, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 06:40:57 2013] Not overwriting source region fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20_src.reg
[Sun Jun 16 06:40:57 2013] Extracting stamp from image fullrun_mos2_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (247, 220) - (322, 295)
[Sun Jun 16 06:40:57 2013] XMMSAS bgd. selection expression = annulus(24684.733398, 22312.536407, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 06:40:57 2013] Writing fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20.gif
[Sun Jun 16 06:41:23 2013] Mean detx,y = (4949.69, -2204.34) 
[Sun Jun 16 06:41:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 06:41:46 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 06:41:47 2013] Setting source spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jun 16 06:41:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jun 16 06:55:23 2013] Not generating rmf since there are only 42 counts
[Sun Jun 16 06:55:23 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:57:05 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:57:05 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 95.00
[Sun Jun 16 06:57:05 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20_bgd.pi.gz = 454.00
[Sun Jun 16 06:57:05 2013] Got source and background scale factors 1330380.000000, 10500264.000000
[Sun Jun 16 06:57:05 2013] User source parameters:
  Position = (284.3, 257.0) = 13 38 18.88 48 12 2.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.5 +/- 10.8
  Background aperture counts = 57.5
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 06:57:05 2013] Updating counts from extracted products
[Sun Jun 16 06:57:05 2013] Set source signif. to 37.48/7.58 = 4.94
[Sun Jun 16 06:57:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:08 2013] Using photon index=1.80, rate=0.00175, arf fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20.arf
[Sun Jun 16 06:57:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:08 2013] Updating source flux to 2.2e-14
[Sun Jun 16 06:57:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 06:57:24 2013] xmm0055990501/analysis//spectral/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete