[Sun Jun 16 06:38:33 2013] Detection parameters:
  Position = (247.3, 384.3) = 13 38 35.02 48 21 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 10.1
  Background counts = 12.7
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 06:38:35 2013] Off-axis axis estimate = 7.24'
[Sun Jun 16 06:39:09 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:09 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Sun Jun 16 06:39:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Sun Jun 16 06:39:09 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.05"
[Sun Jun 16 06:39:09 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 06:39:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 16 06:39:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:36 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.358498 pixels away
[Sun Jun 16 06:39:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:36 2013] Assessing source extent using major
[Sun Jun 16 06:39:36 2013] Source does appear to be extended
[Sun Jun 16 06:39:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:56 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:56 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Sun Jun 16 06:39:56 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Sun Jun 16 06:39:56 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.05"
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 16 06:39:57 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 16 06:39:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:40:21 2013] Spatial fit model total counts = 135.688000, observed total counts = 126.000000
[Sun Jun 16 06:40:21 2013] Offset between fit and detection position for source 13 = 0.515483 pixels
[Sun Jun 16 06:40:21 2013] 137.268400 total counts/ 93.499400 bgd. counts: snr = 4.526497
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.515483 pixels
  Position = (247.3, 383.8) = 13 38 35.06 48 21 13.2
  Extent = 7.1" x 4.4", rotation angle = 142
  Source counts = 43.8 +/- 11.7
  Background counts = 93.5
  Rate = 0.002 +/- 0.0005
[Sun Jun 16 06:40:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:21 2013] Assessing source extent using major
[Sun Jun 16 06:40:21 2013] Source does appear to be extended
[Sun Jun 16 06:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.63
[Sun Jun 16 06:40:21 2013] Source is asymmetric
[Sun Jun 16 06:40:57 2013] XMMSAS src. selection expression = ellipse(21463.135600, 33338.991753, 426.112021, 261.137442, 142.105902, X, Y)
[Sun Jun 16 06:40:57 2013] Not overwriting source region fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 16 06:40:57 2013] Extracting stamp from image fullrun_mos2_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (223, 359) - (272, 408)
[Sun Jun 16 06:40:57 2013] XMMSAS bgd. selection expression = annulus(21463.135600, 33338.991753, 710.186702, 1420.373404, X, Y)
[Sun Jun 16 06:40:57 2013] Writing fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13.gif
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/events/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0055990501/products/events/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:59 2013] Mean detx,y = (-3369.87, 5747.44) 
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/images/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src.img and ../../xmm0055990501/products/images/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/spectra/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:59 2013] Setting source spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 16 06:40:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/lightcurves/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Jun 16 06:54:17 2013] Not generating rmf since there are only 43 counts
[Sun Jun 16 06:54:17 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:57:03 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:57:04 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 52.00
[Sun Jun 16 06:57:04 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_bgd.pi.gz = 225.00
[Sun Jun 16 06:57:04 2013] Got source and background scale factors 352000.000000, 4109357.000000
[Sun Jun 16 06:57:04 2013] User source parameters:
  Position = (247.3, 383.8) = 13 38 35.06 48 21 13.2
  Extent = 7.1" x 4.4", rotation angle = 142
  Source aperture counts = 32.7 +/- 8.3
  Background aperture counts = 19.3
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 06:57:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:08 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13.arf
[Sun Jun 16 06:57:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:08 2013] Updating source flux to 3.7e-14
[Sun Jun 16 06:57:20 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 06:57:24 2013] xmm0055990501/analysis//spectral/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete