[Sun Jun 16 06:38:33 2013] Detection parameters:
  Position = (277.8, 406.6) = 13 38 21.75 48 22 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.7 +/- 8.6
  Background counts = 11.8
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 06:38:35 2013] Off-axis axis estimate = 7.98'
[Sun Jun 16 06:39:09 2013] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:09 2013] Initial guess for spatial extent in simple fitting = 10.42"
[Sun Jun 16 06:39:09 2013] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.835
[Sun Jun 16 06:39:09 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.42"
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src15.csv
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun 16 06:39:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src15.csv
[Sun Jun 16 06:39:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun 16 06:39:10 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun 16 06:39:10 2013] Fit fullrun_mos2_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jun 16 06:39:36 2013] Spatial fit model total counts = 126.529000, observed total counts = 116.000000
[Sun Jun 16 06:39:36 2013] Offset between fit and detection position for source 11 = 0.545696 pixels
[Sun Jun 16 06:39:36 2013] 124.668800 total counts/ 101.426000 bgd. counts: snr = 2.307883
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.545696 pixels
  Position = (277.3, 406.8) = 13 38 21.97 48 22 53.5
  Extent = 3.8 (2.6-5.5)", rotation angle = 0
  Source counts = 23.2 +/- 11.2
  Background counts = 101.4
  Rate = 0.001 +/- 0.0005
[Sun Jun 16 06:39:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:36 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:39:36 2013] Source does appear to be extended
[Sun Jun 16 06:39:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:56 2013] Initial guess for spatial extent in simple fitting = 3.79"
[Sun Jun 16 06:39:56 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.197
[Sun Jun 16 06:39:56 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 3.79"
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src15.csv
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src15.csv
[Sun Jun 16 06:39:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Jun 16 06:39:57 2013] fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun 16 06:39:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Jun 16 06:39:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:40:21 2013] Spatial fit model total counts = 129.614000, observed total counts = 117.000000
[Sun Jun 16 06:40:21 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:40:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:21 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:40:21 2013] Source does appear to be extended
[Sun Jun 16 06:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:57 2013] XMMSAS src. selection expression = ellipse(24074.846800, 35341.179640, 227.294379, 227.294379, 0.000000, X, Y)
[Sun Jun 16 06:40:57 2013] Not overwriting source region fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 16 06:40:57 2013] Extracting stamp from image fullrun_mos2_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (264, 394) - (290, 420)
[Sun Jun 16 06:40:57 2013] XMMSAS bgd. selection expression = annulus(24074.846800, 35341.179640, 378.823965, 757.647930, X, Y)
[Sun Jun 16 06:40:57 2013] Writing fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11.gif
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/events/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0055990501/products/events/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:59 2013] Mean detx,y = (-6342.55, 4345.70) 
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/images/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src.img and ../../xmm0055990501/products/images/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/spectra/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:59 2013] Setting source spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 16 06:40:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 16 06:40:59 2013] ../../xmm0055990501/products/lightcurves/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Jun 16 06:54:58 2013] Not generating rmf since there are only 23 counts
[Sun Jun 16 06:54:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:57:04 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:57:04 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 33.00
[Sun Jun 16 06:57:05 2013] Total counts from fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 74.00
[Sun Jun 16 06:57:05 2013] Got source and background scale factors 159812.000000, 1208484.000000
[Sun Jun 16 06:57:05 2013] User source parameters:
  Position = (277.3, 406.8) = 13 38 21.97 48 22 53.5
  Extent = 3.8 (2.6-5.5)", rotation angle = 0
  Source aperture counts = 23.2 +/- 6.8
  Background aperture counts = 9.8
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 06:57:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:08 2013] Using photon index=1.80, rate=0.00109, arf fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11.arf
[Sun Jun 16 06:57:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:08 2013] Updating source flux to 2.8e-14
[Sun Jun 16 06:57:20 2013] Flag p found in src. 11 procflags, skipping spectral fitting
[Sun Jun 16 06:57:20 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 06:57:24 2013] xmm0055990501/analysis//spectral/fullrun_mos2_xmm0055990501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete