[Sun Jun 16 06:38:31 2013] Detection parameters:
  Position = (349.4, 192.5) = 13 37 50.61 48 7 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.2 +/- 9.2
  Background counts = 9.6
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 06:38:32 2013] Off-axis axis estimate = 8.52'
[Sun Jun 16 06:39:07 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:07 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Jun 16 06:39:07 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Sun Jun 16 06:39:07 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.69"
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 16 06:39:08 2013] Fit fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src19 appears to have run properly
[Sun Jun 16 06:39:09 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 16 06:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 16 06:39:09 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 16 06:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 16 06:39:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:30 2013] Warning, spatial fit 19 centroid is now closest to src. 6
[Sun Jun 16 06:39:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:30 2013] Assessing source extent using major
[Sun Jun 16 06:39:30 2013] Source does appear to be extended
[Sun Jun 16 06:39:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:55 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:55 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Jun 16 06:39:55 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Sun Jun 16 06:39:55 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 10.69"
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 16 06:39:56 2013] Fit fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 16 06:39:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:40:15 2013] Spatial fit model total counts = 111.755000, observed total counts = 108.000000
[Sun Jun 16 06:40:15 2013] Offset between fit and detection position for source 18 = 0.295525 pixels
[Sun Jun 16 06:40:15 2013] 112.000400 total counts/ 85.612600 bgd. counts: snr = 2.851900
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.295525 pixels
  Position = (349.4, 192.8) = 13 37 50.59 48 7 22.7
  Extent = 7.2" x 2.8", rotation angle = 180
  Source counts = 26.4 +/- 10.6
  Background counts = 85.6
  Rate = 0.001 +/- 0.0005
[Sun Jun 16 06:40:15 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:15 2013] Assessing source extent using major
[Sun Jun 16 06:40:15 2013] Source does appear to be extended
[Sun Jun 16 06:40:15 2013] Computing asymmetry using major and minor axis, asym = 2.61
[Sun Jun 16 06:40:15 2013] Source is asymmetric
[Sun Jun 16 06:40:51 2013] XMMSAS src. selection expression = ellipse(30348.547000, 16728.436340, 433.122012, 165.939005, 179.991570, X, Y)
[Sun Jun 16 06:40:51 2013] Not overwriting source region fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun 16 06:40:51 2013] Extracting stamp from image fullrun_mos1_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (324, 168) - (374, 218)
[Sun Jun 16 06:40:51 2013] XMMSAS bgd. selection expression = annulus(30348.547000, 16728.436340, 721.870021, 1443.740042, X, Y) && !ellipse(30283.576874, 17932.849197, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 06:40:51 2013] Writing fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18.gif
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/events/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0055990501/products/events/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:52 2013] Mean detx,y = (-9544.53, -7515.97) 
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/images/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src.img and ../../xmm0055990501/products/images/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/spectra/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:52 2013] Setting source spectrum file to fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 16 06:40:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/lightcurves/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Jun 16 06:40:57 2013] Not generating rmf since there are only 26 counts
[Sun Jun 16 06:40:57 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:40:57 2013] fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Sun Jun 16 06:56:59 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:56:59 2013] Total counts from fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 38.00
[Sun Jun 16 06:56:59 2013] Total counts from fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_bgd.pi.gz = 140.00
[Sun Jun 16 06:56:59 2013] Got source and background scale factors 227200.000000, 3454846.000000
[Sun Jun 16 06:56:59 2013] User source parameters:
  Position = (349.4, 192.8) = 13 37 50.59 48 7 22.7
  Extent = 7.2" x 2.8", rotation angle = 180
  Source aperture counts = 28.8 +/- 7.2
  Background aperture counts = 9.2
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 06:57:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:01 2013] Using photon index=1.80, rate=0.00124, arf fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18.arf
[Sun Jun 16 06:57:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:01 2013] Updating source flux to 4.1e-14
[Sun Jun 16 06:57:10 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 06:57:20 2013] xmm0055990501/analysis//spectral/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete