[Sun Jun 16 06:38:31 2013] Detection parameters:
  Position = (316.3, 380.6) = 13 38 4.92 48 21 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.3 +/- 9.3
  Background counts = 12.9
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 06:38:32 2013] Off-axis axis estimate = 6.10'
[Sun Jun 16 06:39:07 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:07 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Jun 16 06:39:07 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.871
[Sun Jun 16 06:39:07 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.48"
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun 16 06:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src17.csv
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun 16 06:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src17.csv
[Sun Jun 16 06:39:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:09 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun 16 06:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 16 06:39:09 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun 16 06:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 16 06:39:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:30 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.159968 pixels away
[Sun Jun 16 06:39:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:30 2013] Assessing source extent using major
[Sun Jun 16 06:39:30 2013] Source does appear to be extended
[Sun Jun 16 06:39:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:55 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:55 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Jun 16 06:39:55 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.871
[Sun Jun 16 06:39:55 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.48"
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src17.csv
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src17.csv
[Sun Jun 16 06:39:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 16 06:39:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:40:15 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 81.589958 pixels away
[Sun Jun 16 06:40:15 2013] Source 11 is offset by -4.815836 and -6.508951 pixels which is larger than
2 X fitted extent = 0.642759 x 0.642759, not incorporating fit results
[Sun Jun 16 06:40:15 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:15 2013] Assessing source extent using major
[Sun Jun 16 06:40:15 2013] Source does appear to be extended
[Sun Jun 16 06:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:51 2013] XMMSAS src. selection expression = ellipse(27471.882263, 33066.581238, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 06:40:51 2013] Not overwriting source region fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 16 06:40:51 2013] Extracting stamp from image fullrun_mos1_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (279, 343) - (354, 418)
[Sun Jun 16 06:40:51 2013] XMMSAS bgd. selection expression = annulus(27471.882263, 33066.581238, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 06:40:51 2013] Writing fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11.gif
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/events/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0055990501/products/events/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:52 2013] Mean detx,y = (482.23, 5696.78) 
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/images/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src.img and ../../xmm0055990501/products/images/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/spectra/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:52 2013] Setting source spectrum file to fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 16 06:40:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/lightcurves/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Jun 16 06:40:57 2013] Not generating rmf since there are only 37 counts
[Sun Jun 16 06:40:57 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:40:57 2013] fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Sun Jun 16 06:56:59 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:56:59 2013] Total counts from fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 129.00
[Sun Jun 16 06:56:59 2013] Total counts from fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 521.00
[Sun Jun 16 06:56:59 2013] Got source and background scale factors 1311666.000000, 9989007.000000
[Sun Jun 16 06:56:59 2013] User source parameters:
  Position = (316.3, 380.6) = 13 38 4.92 48 21 0.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 60.6 +/- 12.4
  Background aperture counts = 68.4
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 06:56:59 2013] Updating counts from extracted products
[Sun Jun 16 06:56:59 2013] Set source signif. to 60.59/8.27 = 7.33
[Sun Jun 16 06:57:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:00 2013] Using photon index=1.80, rate=0.00284, arf fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11.arf
[Sun Jun 16 06:57:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:01 2013] Updating source flux to 3.3e-14
[Sun Jun 16 06:57:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 06:57:20 2013] xmm0055990501/analysis//spectral/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete