[Sun Jun 16 06:38:31 2013] Detection parameters:
  Position = (247.5, 385.0) = 13 38 34.98 48 21 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.1 +/- 11.0
  Background counts = 11.9
  Rate = 0.004 +/- 0.0006

[Sun Jun 16 06:38:32 2013] Off-axis axis estimate = 7.29'
[Sun Jun 16 06:39:07 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:07 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Jun 16 06:39:07 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Sun Jun 16 06:39:07 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.07"
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 16 06:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src9.csv
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 16 06:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src9.csv
[Sun Jun 16 06:39:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 16 06:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 16 06:39:08 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 16 06:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 16 06:39:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:30 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.184794 pixels away
[Sun Jun 16 06:39:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:39:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:39:30 2013] Assessing source extent using major
[Sun Jun 16 06:39:30 2013] Source does appear to be extended
[Sun Jun 16 06:39:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:39:55 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:39:55 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Jun 16 06:39:55 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Sun Jun 16 06:39:55 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.07"
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src9.csv
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 16 06:39:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src9.csv
[Sun Jun 16 06:39:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 16 06:39:56 2013] fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 16 06:39:56 2013] Fit fullrun_mos1_xmm0055990501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jun 16 06:40:15 2013] Spatial fit model total counts = 133.552000, observed total counts = 121.000000
[Sun Jun 16 06:40:15 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:40:15 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:40:15 2013] Assessing source extent using major
[Sun Jun 16 06:40:15 2013] Source does appear to be extended
[Sun Jun 16 06:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:40:51 2013] XMMSAS src. selection expression = ellipse(21480.184723, 33450.307312, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 06:40:51 2013] Not overwriting source region fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 16 06:40:51 2013] Extracting stamp from image fullrun_mos1_xmm0055990501_pi300-10000_cl_sm2.00.img.gz, (210, 348) - (285, 423)
[Sun Jun 16 06:40:51 2013] XMMSAS bgd. selection expression = annulus(21480.184723, 33450.307312, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 06:40:51 2013] Writing fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10.gif
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/events/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0055990501/products/events/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Jun 16 06:40:52 2013] Mean detx,y = (5961.55, 3292.35) 
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/images/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src.img and ../../xmm0055990501/products/images/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/spectra/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0055990501/products/spectra/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Jun 16 06:40:52 2013] Setting source spectrum file to fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 16 06:40:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 16 06:40:52 2013] ../../xmm0055990501/products/lightcurves/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0055990501/products/lightcurves/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Jun 16 06:40:57 2013] Not generating rmf since there are only 68 counts
[Sun Jun 16 06:40:57 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:40:57 2013] fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun Jun 16 06:56:57 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:56:57 2013] Total counts from fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 110.00
[Sun Jun 16 06:56:57 2013] Total counts from fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_bgd.pi.gz = 475.00
[Sun Jun 16 06:56:57 2013] Got source and background scale factors 1279962.000000, 10131416.000000
[Sun Jun 16 06:56:57 2013] User source parameters:
  Position = (247.5, 385.0) = 13 38 34.98 48 21 19.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.0 +/- 11.5
  Background aperture counts = 60.0
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 06:56:57 2013] Updating counts from extracted products
[Sun Jun 16 06:56:57 2013] Set source signif. to 49.99/7.75 = 6.45
[Sun Jun 16 06:57:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:57:00 2013] Using photon index=1.80, rate=0.00235, arf fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10.arf
[Sun Jun 16 06:57:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:57:00 2013] Updating source flux to 2.9e-14
[Sun Jun 16 06:57:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 06:57:20 2013] xmm0055990501/analysis//spectral/fullrun_mos1_xmm0055990501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete