[Tue Jul 17 05:59:54 2012] Detection parameters:
  Position = (356.1, 363.2) = 23 39 43.21 -12 13 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.4 +/- 8.2
  Background counts = 4.7
  Rate = 0.004 +/- 0.0008

[Tue Jul 17 05:59:54 2012] Off-axis axis estimate = 6.28'
[Tue Jul 17 06:57:10 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 06:57:10 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Tue Jul 17 06:57:10 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.234
[Tue Jul 17 06:57:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.57"
[Tue Jul 17 07:22:32 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul 17 07:22:32 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul 17 07:22:32 2012] Fit fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_src11 appears to have run properly
[Tue Jul 17 07:22:32 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul 17 07:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jul 17 07:22:32 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul 17 07:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jul 17 07:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 07:22:42 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.737895 pixels away
[Tue Jul 17 07:22:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 07:22:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 07:22:42 2012] Assessing source extent using major
[Tue Jul 17 07:22:42 2012] Source does appear to be extended
[Tue Jul 17 07:22:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:18:04 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 08:18:04 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Tue Jul 17 08:18:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.234
[Tue Jul 17 08:18:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.57"
[Tue Jul 17 08:49:43 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jul 17 08:49:43 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jul 17 08:49:43 2012] Fit fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_src11 appears to have run properly
[Tue Jul 17 08:49:43 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jul 17 08:49:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jul 17 08:49:43 2012] fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jul 17 08:49:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jul 17 08:49:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055990301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 08:49:56 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 46.326138 pixels away
[Tue Jul 17 08:49:56 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 31.296080 pixels away
[Tue Jul 17 08:49:56 2012] Spatial fit model total counts = 71.762000, observed total counts = 72.000000
[Tue Jul 17 08:49:56 2012] Offset between fit and detection position for source 10 = 1.060549 pixels
[Tue Jul 17 08:49:56 2012] 71.566800 total counts/ 43.871100 bgd. counts: snr = 4.181413
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.060549 pixels
  Position = (355.5, 362.3) = 23 39 43.38 -12 13 45.6
  Extent = 2.7" x 2.7", rotation angle = 73
  Source counts = 27.7 +/- 8.5
  Background counts = 43.9
  Rate = 0.002 +/- 0.0006
[Tue Jul 17 08:49:56 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 08:49:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 08:49:56 2012] Assessing source extent using major
[Tue Jul 17 08:49:56 2012] Source does appear to be extended
[Tue Jul 17 08:49:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 09:42:38 2012] XMMSAS src. selection expression = ellipse(30880.907400, 31468.432600, 161.803205, 161.803205, 73.453600, X, Y)
[Tue Jul 17 09:42:38 2012] Writing source region out to fullrun_mos2_xmm0055990301_pi300-10000_pass1_cl_src10_src.reg
[Tue Jul 17 09:42:38 2012] Extracting stamp from image fullrun_mos2_xmm0055990301_pi300-10000_cl_sm2.00.img.gz, (346, 353) - (365, 372)
[Tue Jul 17 09:42:38 2012] XMMSAS bgd. selection expression = annulus(30880.907400, 31468.432600, 269.672008, 539.344016, X, Y)
[Tue Jul 17 09:42:38 2012] Writing fullrun_mos2_xmm0055990301_pi300-10000_pass1_cl_src10.gif
[Tue Jul 17 09:45:34 2012] Mean detx,y = (-1010.10, 5528.20) 
[Tue Jul 17 09:45:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 09:45:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 09:45:42 2012] Setting source spectrum file to fullrun_mos2_xmm0055990301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jul 17 09:45:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0055990301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jul 17 09:58:54 2012] Not generating rmf since there are only 27 counts
[Tue Jul 17 09:58:54 2012] rmf not generated due to insufficient counts
[Tue Jul 17 10:00:22 2012] Updating aperture counts using extracted products
[Tue Jul 17 10:00:22 2012] Error reading totcts from fullrun_mos2_xmm0055990301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jul 17 10:00:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 10:00:23 2012] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0055990301_pi300-10000_pass1_cl_src10.arf
[Tue Jul 17 10:00:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 10:00:23 2012] Updating source flux to 5.5e-14
[Tue Jul 17 10:01:09 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting