[Sat Jul 21 10:42:38 2012] Detection parameters:
  Position = (266.6, 162.5) = 10 50 3.28 32 50 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.6 +/- 19.0
  Background counts = 97.9
  Rate = 0.006 +/- 0.0008

[Sat Jul 21 10:42:38 2012] Off-axis axis estimate = 10.12'
[Sat Jul 21 11:53:12 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:53:12 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sat Jul 21 11:53:12 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.242
[Sat Jul 21 11:53:12 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.49"
[Sat Jul 21 13:03:53 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jul 21 13:03:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_src9.csv
[Sat Jul 21 13:03:53 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jul 21 13:03:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_src9.csv
[Sat Jul 21 13:03:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 13:03:54 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jul 21 13:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jul 21 13:03:54 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jul 21 13:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jul 21 13:03:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 13:41:57 2012] Source 28 is offset by 0.480668 and -7.750814 pixels which is larger than
2 X fitted extent = 2.010064 x 2.010064, not incorporating fit results
[Sat Jul 21 13:41:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:41:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:41:57 2012] Assessing source extent using major
[Sat Jul 21 13:41:57 2012] Source does appear to be extended
[Sat Jul 21 13:41:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 14:44:35 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 14:44:35 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sat Jul 21 14:44:35 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.242
[Sat Jul 21 14:44:35 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.49"
[Sat Jul 21 15:49:14 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jul 21 15:49:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_src9.csv
[Sat Jul 21 15:49:14 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jul 21 15:49:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_src9.csv
[Sat Jul 21 15:49:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 15:49:14 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jul 21 15:49:14 2012] fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jul 21 15:49:14 2012] Fit fullrun_mos1_xmm0055990201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Jul 21 16:21:37 2012] Spatial fit model total counts = 188.337000, observed total counts = 175.000000
[Sat Jul 21 16:21:37 2012] Offset between fit and detection position for source 28 = 0.204335 pixels
[Sat Jul 21 16:21:37 2012] 190.433300 total counts/ 127.747000 bgd. counts: snr = 5.546222
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.204335 pixels
  Position = (266.5, 162.7) = 10 50 3.33 32 50 45.5
  Extent = 4.1 (2.9-5.4)", rotation angle = 0
  Source counts = 62.7 +/- 13.8
  Background counts = 127.7
  Rate = 0.003 +/- 0.0007
[Sat Jul 21 16:21:37 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 16:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 16:21:37 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 16:21:37 2012] Source does appear to be extended
[Sat Jul 21 16:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 17:19:23 2012] XMMSAS src. selection expression = ellipse(23134.318000, 14104.072800, 247.436407, 247.436407, 0.000000, X, Y)
[Sat Jul 21 17:19:23 2012] Writing source region out to fullrun_mos1_xmm0055990201_pi300-10000_pass1_cl_src28_src.reg
[Sat Jul 21 17:19:23 2012] Extracting stamp from image fullrun_mos1_xmm0055990201_pi300-10000_cl_sm2.00.img.gz, (252, 148) - (281, 177)
[Sat Jul 21 17:19:23 2012] XMMSAS bgd. selection expression = annulus(23134.318000, 14104.072800, 412.394012, 824.788024, X, Y)
[Sat Jul 21 17:19:23 2012] Writing fullrun_mos1_xmm0055990201_pi300-10000_pass1_cl_src28.gif
[Sat Jul 21 17:21:11 2012] Mean detx,y = (7370.01, 6996.73) 
[Sat Jul 21 17:21:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 17:21:24 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 17:21:24 2012] Setting source spectrum file to fullrun_mos1_xmm0055990201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jul 21 17:21:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0055990201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jul 21 17:44:17 2012] Not generating rmf since there are only 62 counts
[Sat Jul 21 17:44:17 2012] rmf not generated due to insufficient counts
[Sat Jul 21 18:10:43 2012] Updating aperture counts using extracted products
[Sat Jul 21 18:10:43 2012] Error reading totcts from fullrun_mos1_xmm0055990201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jul 21 18:10:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 18:10:44 2012] Using photon index=1.80, rate=0.00312, arf fullrun_mos1_xmm0055990201_pi300-10000_pass1_cl_src28.arf
[Sat Jul 21 18:10:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 18:10:44 2012] Updating source flux to 6.8e-14
[Sat Jul 21 18:10:49 2012] Flag b found in src. 28 procflags, skipping spectral fitting
[Sat Jul 21 18:10:49 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting