[Wed Apr 11 06:32:58 2012] Detection parameters:
  Position = (174.7, 281.0) = 3 40 26.85 -35 27 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.8 +/- 21.0
  Background counts = 76.8
  Rate = 0.004 +/- 0.0005

[Wed Apr 11 06:32:59 2012] Off-axis axis estimate = 9.06'
[Wed Apr 11 06:33:27 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:27 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Apr 11 06:33:27 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.987
[Wed Apr 11 06:33:27 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.96"
[Wed Apr 11 06:33:31 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src35.ximg exists
[Wed Apr 11 06:33:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src35.csv
[Wed Apr 11 06:33:31 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Apr 11 06:33:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src35.csv
[Wed Apr 11 06:33:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:33:32 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Apr 11 06:33:32 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Apr 11 06:33:32 2012] Fit fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Apr 11 06:33:46 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 10.378939 pixels away
[Wed Apr 11 06:33:46 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:46 2012] Assessing source extent using major
[Wed Apr 11 06:33:46 2012] Source does appear to be extended
[Wed Apr 11 06:33:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:34:10 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:10 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Apr 11 06:34:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.987
[Wed Apr 11 06:34:10 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.96"
[Wed Apr 11 06:34:12 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src31.ximg exists
[Wed Apr 11 06:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src31.csv
[Wed Apr 11 06:34:12 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Apr 11 06:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src31.csv
[Wed Apr 11 06:34:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:34:13 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Apr 11 06:34:13 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Apr 11 06:34:13 2012] Fit fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Apr 11 06:34:26 2012] Spatial fit model total counts = 737.998000, observed total counts = 738.000000
[Wed Apr 11 06:34:26 2012] Offset between fit and detection position for source 36 = 0.043273 pixels
[Wed Apr 11 06:34:26 2012] 739.888000 total counts/ 622.235000 bgd. counts: snr = 4.716565
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.043273 pixels
  Position = (174.7, 281.0) = 3 40 26.85 -35 27 35.1
  Extent = 5.6 (4.6-7.3)", rotation angle = 0
  Source counts = 117.7 +/- 27.2
  Background counts = 622.2
  Rate = 0.003 +/- 0.0006
[Wed Apr 11 06:34:26 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:26 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:34:26 2012] Source does appear to be extended
[Wed Apr 11 06:34:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:34:50 2012] XMMSAS src. selection expression = ellipse(15151.870400, 24395.829400, 333.928810, 333.928810, 0.000000, X, Y)
[Wed Apr 11 06:34:50 2012] Not overwriting source region fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src.reg
[Wed Apr 11 06:34:50 2012] Extracting stamp from image fullrun_pn_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (156, 262) - (194, 300)
[Wed Apr 11 06:34:50 2012] XMMSAS bgd. selection expression = annulus(15151.870400, 24395.829400, 556.548016, 1113.096032, X, Y)
[Wed Apr 11 06:34:50 2012] Writing fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36.gif
[Wed Apr 11 06:34:56 2012] ../../xmm0055140101/products/events/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0055140101/products/events/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Wed Apr 11 06:34:56 2012] Mean detx,y = (-8577.75, 9327.74) 
[Wed Apr 11 06:34:56 2012] ../../xmm0055140101/products/images/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src.img and ../../xmm0055140101/products/images/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Wed Apr 11 06:34:56 2012] ../../xmm0055140101/products/spectra/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0055140101/products/spectra/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Wed Apr 11 06:34:56 2012] Setting source spectrum file to fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Apr 11 06:34:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Apr 11 06:34:56 2012] ../../xmm0055140101/products/lightcurves/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0055140101/products/lightcurves/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Wed Apr 11 06:35:06 2012] fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36.rmf exists, delete to re-create
[Wed Apr 11 06:35:06 2012] fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Wed Apr 11 08:36:49 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:49 2012] Error reading totcts from fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Apr 11 08:36:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:49 2012] Using photon index=1.80, rate=0.00272, arf fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src36.arf
[Wed Apr 11 08:36:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:49 2012] Updating source flux to 2.1e-14