[Wed Apr 11 06:32:57 2012] Detection parameters:
  Position = (499.0, 301.0) = 3 38 31.43 -35 26 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 916.1 +/- 43.8
  Background counts = 121.0
  Rate = 0.02 +/- 0.0009

[Wed Apr 11 06:32:59 2012] Off-axis axis estimate = 14.54'
[Wed Apr 11 06:33:27 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:27 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Wed Apr 11 06:33:27 2012] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.202
[Wed Apr 11 06:33:27 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.70"
[Wed Apr 11 06:33:28 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Apr 11 06:33:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:33:28 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Apr 11 06:33:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:33:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:33:32 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Apr 11 06:33:32 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:33:32 2012] Fit fullrun_pn_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Apr 11 06:33:46 2012] Source 3 is offset by 5.796315 and -0.839253 pixels which is larger than
2 X fitted extent = 1.604589 x 1.604589, not incorporating fit results
[Wed Apr 11 06:33:46 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Wed Apr 11 06:33:46 2012] Spatial fit model total counts = 5534.210000, observed total counts = 5535.000000
[Wed Apr 11 06:33:46 2012] Offset between fit and detection position for source 3 = 6.464382 pixels
[Wed Apr 11 06:33:46 2012] Warning, changing simple spatial fit ID from 3 to 18
[Wed Apr 11 06:33:46 2012] 4752.068000 total counts/ 4546.710000 bgd. counts: snr = 3.045531
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.464382 pixels
  Position = (498.1, 294.6) = 3 38 31.73 -35 26 35.0
  Extent = 15.2 (6.3-26.6)", rotation angle = 0
  Source counts = 205.4 +/- 68.9
  Background counts = 4546.7
  Rate = 0.005 +/- 0.002
[Wed Apr 11 06:33:46 2012] Spatial fit model total counts = 3309.990000, observed total counts = 3309.000000
[Wed Apr 11 06:33:46 2012] Offset between fit and detection position for source 3 = 5.823015 pixels
[Wed Apr 11 06:33:46 2012] Warning, changing simple spatial fit ID from 18 to 32
[Wed Apr 11 06:33:46 2012] 3042.804000 total counts/ 2846.860000 bgd. counts: snr = 3.672391
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.823015 pixels
  Position = (493.1, 297.6) = 3 38 33.50 -35 26 21.9
  Extent = 25.6 (23.2-26.7)" x 10.4 (6.4-24.8)", rotation angle = 36
  Source counts = 195.9 +/- 55.2
  Background counts = 2846.9
  Rate = 0.005 +/- 0.001
[Wed Apr 11 06:33:46 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:46 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:33:46 2012] Source does appear to be extended
[Wed Apr 11 06:33:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Wed Apr 11 06:33:46 2012] Source is confused with source 1
[Wed Apr 11 06:34:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:10 2012] Initial guess for spatial extent in simple fitting = 17.96"
[Wed Apr 11 06:34:10 2012] source mask rpix=4.1, npix_max = 85, mask sum = 90, frac = 1.050
[Wed Apr 11 06:34:10 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 17.96"
[Wed Apr 11 06:34:11 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Apr 11 06:34:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:34:11 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Apr 11 06:34:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:34:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:34:13 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Apr 11 06:34:13 2012] fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:34:13 2012] Fit fullrun_pn_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Apr 11 06:34:26 2012] Source 3 is offset by -2.906115 and -2.349885 pixels which is larger than
2 X fitted extent = 1.372106 x 1.372106, not incorporating fit results
[Wed Apr 11 06:34:26 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Wed Apr 11 06:34:26 2012] Source 3 is offset by 3.186138 and -3.954897 pixels which is larger than
2 X fitted extent = 1.491402 x 1.491402, not incorporating fit results
[Wed Apr 11 06:34:26 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:26 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:34:26 2012] Source does appear to be extended
[Wed Apr 11 06:34:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Wed Apr 11 06:34:49 2012] XMMSAS src. selection expression = ellipse(42852.684000, 25845.044000, 1533.462044, 621.582018, 36.287000, X, Y)
[Wed Apr 11 06:34:49 2012] Not overwriting source region fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src.reg
[Wed Apr 11 06:34:49 2012] Extracting stamp from image fullrun_pn_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (405, 209) - (581, 386)
[Wed Apr 11 06:34:49 2012] XMMSAS bgd. selection expression = annulus(42852.684000, 25845.044000, 2555.770074, 5111.540147, X, Y) && !ellipse(44116.564000, 25088.022000, 1032.160030, 1032.160030, 0.000000, X, Y) && !ellipse(43251.344000, 24710.080000, 1457.840042, 1457.840042, 0.000000, X, Y) && !ellipse(38433.701000, 25388.703400, 464.190413, 464.190413, 0.000000, X, Y) && !ellipse(39826.568800, 30034.418600, 313.408009, 313.408009, 0.000000, X, Y) && !ellipse(41018.334000, 28167.698000, 2022.608058, 2022.608058, 0.000000, X, Y) && !ellipse(43833.718018, 27342.306213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42428.551727, 24910.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43025.088000, 24066.234000, 2066.744059, 2066.744059, 0.000000, X, Y) && !ellipse(41979.286000, 23076.512000, 2496.416072, 2496.416072, 0.000000, X, Y) && !ellipse(42883.425740, 29696.424000, 803.184023, 803.184023, 0.000000, X, Y) && !ellipse(43451.765503, 28383.584808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42533.035095, 26820.831909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41646.534088, 24135.551208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39975.412980, 24326.178600, 278.784808, 278.784808, 0.000000, X, Y) && !ellipse(42208.464000, 24175.842000, 2093.304060, 2093.304060, 0.000000, X, Y) && !ellipse(41264.783356, 23532.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39165.908356, 23184.586090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41557.056000, 22245.902000, 1445.064042, 1445.064042, 0.000000, X, Y) && !ellipse(41280.670000, 21917.524000, 2149.992062, 1932.136056, 90.000000, X, Y) && !ellipse(38945.745361, 27501.546906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41619.227112, 26405.025116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40617.330566, 23840.723480, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 06:34:49 2012] Writing fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3.gif
[Wed Apr 11 06:34:51 2012] ../../xmm0055140101/products/events/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0055140101/products/events/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Apr 11 06:34:51 2012] Mean detx,y = (12381.24, -9021.00) 
[Wed Apr 11 06:34:51 2012] ../../xmm0055140101/products/images/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0055140101/products/images/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Apr 11 06:34:51 2012] ../../xmm0055140101/products/spectra/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0055140101/products/spectra/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Apr 11 06:34:51 2012] Setting source spectrum file to fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 06:34:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Apr 11 06:34:51 2012] ../../xmm0055140101/products/lightcurves/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0055140101/products/lightcurves/fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Apr 11 06:35:06 2012] fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Wed Apr 11 06:35:06 2012] fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Wed Apr 11 08:36:48 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:48 2012] Error reading totcts from fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 08:36:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:49 2012] Using photon index=1.80, rate=0.00453, arf fullrun_pn_xmm0055140101_pi300-10000_pass1_cl_src3.arf
[Wed Apr 11 08:36:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:49 2012] Updating source flux to 2.7e-14
[Wed Apr 11 08:41:20 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed Apr 11 08:41:20 2012] Flag c found in src. 3 procflags, skipping spectral fitting