[Wed Apr 11 06:33:01 2012] Detection parameters:
  Position = (384.6, 272.1) = 3 39 12.12 -35 28 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 628.5 +/- 32.0
  Background counts = 56.0
  Rate = 0.02 +/- 0.0008

[Wed Apr 11 06:33:02 2012] Off-axis axis estimate = 6.53'
[Wed Apr 11 06:33:34 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:34 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Wed Apr 11 06:33:34 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.007
[Wed Apr 11 06:33:34 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.69"
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Apr 11 06:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src5.csv
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Apr 11 06:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src5.csv
[Wed Apr 11 06:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Apr 11 06:33:34 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Apr 11 06:33:56 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.547280 pixels away
[Wed Apr 11 06:33:56 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:56 2012] Assessing source extent using major
[Wed Apr 11 06:33:56 2012] Source does appear to be extended
[Wed Apr 11 06:33:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:34:15 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:15 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Wed Apr 11 06:34:15 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.007
[Wed Apr 11 06:34:15 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.69"
[Wed Apr 11 06:34:15 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Apr 11 06:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src5.csv
[Wed Apr 11 06:34:15 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Apr 11 06:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src5.csv
[Wed Apr 11 06:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Apr 11 06:34:16 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Apr 11 06:34:36 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.547280 pixels away
[Wed Apr 11 06:34:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:36 2012] Assessing source extent using major
[Wed Apr 11 06:34:36 2012] Source does appear to be extended
[Wed Apr 11 06:34:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:33:25 2012] XMMSAS src. selection expression = ellipse(33410.195129, 23622.551758, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing source region out to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src8_src.reg
[Wed Apr 11 07:33:25 2012] Extracting stamp from image fullrun_mos2_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (347, 235) - (422, 310)
[Wed Apr 11 07:33:25 2012] XMMSAS bgd. selection expression = annulus(33410.195129, 23622.551758, 1087.500000, 2175.000000, X, Y) && !ellipse(31442.329895, 22244.777405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34019.973053, 24921.320404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33546.756561, 26144.564087, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src8.gif
[Wed Apr 11 07:35:02 2012] Mean detx,y = (-6062.90, 1268.31) 
[Wed Apr 11 07:35:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 07:35:12 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 07:35:12 2012] Setting source spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Apr 11 07:35:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Apr 11 08:03:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Apr 11 08:03:31 2012] rmf not generated due to insufficient counts
[Wed Apr 11 08:36:51 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:51 2012] Error reading totcts from fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Apr 11 08:36:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:51 2012] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src8.arf
[Wed Apr 11 08:36:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:51 2012] Updating source flux to 2.1e-13
[Wed Apr 11 08:39:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting