[Wed Apr 11 06:33:02 2012] Detection parameters:
  Position = (395.3, 228.8) = 3 39 8.29 -35 31 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.7 +/- 17.2
  Background counts = 40.3
  Rate = 0.004 +/- 0.0005

[Wed Apr 11 06:33:02 2012] Off-axis axis estimate = 8.65'
[Wed Apr 11 06:33:34 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:34 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Wed Apr 11 06:33:34 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Wed Apr 11 06:33:34 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.75"
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src16.ximg exists
[Wed Apr 11 06:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src16.csv
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Apr 11 06:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src16.csv
[Wed Apr 11 06:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:33:35 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Apr 11 06:33:35 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Apr 11 06:33:35 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Apr 11 06:33:56 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 14.635314 pixels away
[Wed Apr 11 06:33:56 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:56 2012] Assessing source extent using major
[Wed Apr 11 06:33:56 2012] Source does appear to be extended
[Wed Apr 11 06:33:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:34:15 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:15 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Wed Apr 11 06:34:15 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Wed Apr 11 06:34:15 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.75"
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src16.ximg exists
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Apr 11 06:34:16 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src16 appears to have run properly
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Apr 11 06:34:16 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Apr 11 06:34:36 2012] Source 43 is offset by -2.234378 and 8.719633 pixels which is larger than
2 X fitted extent = 1.235775 x 1.235775, not incorporating fit results
[Wed Apr 11 06:34:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:36 2012] Assessing source extent using major
[Wed Apr 11 06:34:36 2012] Source does appear to be extended
[Wed Apr 11 06:34:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:33:25 2012] XMMSAS src. selection expression = ellipse(34340.119141, 19861.242111, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing source region out to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src43_src.reg
[Wed Apr 11 07:33:25 2012] Extracting stamp from image fullrun_mos2_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (358, 191) - (433, 266)
[Wed Apr 11 07:33:25 2012] XMMSAS bgd. selection expression = annulus(34340.119141, 19861.242111, 1087.500000, 2175.000000, X, Y) && !ellipse(31442.329895, 22244.777405, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src43.gif
[Wed Apr 11 07:45:08 2012] Mean detx,y = (-9148.52, -1105.18) 
[Wed Apr 11 07:45:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 07:45:15 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 07:45:15 2012] Setting source spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Apr 11 07:45:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Apr 11 08:19:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Apr 11 08:19:28 2012] rmf not generated due to insufficient counts
[Wed Apr 11 08:36:51 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:51 2012] Error reading totcts from fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Apr 11 08:36:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:52 2012] Using photon index=1.80, rate=0.00409, arf fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src43.arf
[Wed Apr 11 08:36:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:52 2012] Updating source flux to 6.1e-14
[Wed Apr 11 08:39:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting