[Wed Apr 11 06:33:01 2012] Detection parameters:
  Position = (503.4, 293.2) = 3 38 29.82 -35 26 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 759.2 +/- 35.2
  Background counts = 102.4
  Rate = 0.02 +/- 0.0007

[Wed Apr 11 06:33:02 2012] Off-axis axis estimate = 14.87'
[Wed Apr 11 06:33:34 2012] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:33:34 2012] Initial guess for spatial extent in simple fitting = 13.86"
[Wed Apr 11 06:33:34 2012] source mask rpix=3.2, npix_max = 54, mask sum = 42, frac = 0.772
[Wed Apr 11 06:33:34 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.86"
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Apr 11 06:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src6.csv
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Apr 11 06:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src6.csv
[Wed Apr 11 06:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Apr 11 06:33:34 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Apr 11 06:33:56 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Wed Apr 11 06:33:56 2012] Spatial fit model total counts = 1996.970000, observed total counts = 2000.000000
[Wed Apr 11 06:33:56 2012] Offset between fit and detection position for source 4 = 4.277154 pixels
[Wed Apr 11 06:33:56 2012] Warning, changing simple spatial fit ID from 6 to 28
[Wed Apr 11 06:33:56 2012] 1752.277000 total counts/ 576.257000 bgd. counts: snr = 48.989905
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.277154 pixels
  Position = (501.5, 297.0) = 3 38 30.52 -35 26 24.7
  Extent = 27.8 (27.8-55.6)" x 20.5 (17.6-24.0)", rotation angle = 44 (34-67) degrees
  Source counts = 1176.0 +/- 41.9
  Background counts = 576.3
  Rate = 0.02 +/- 0.0009
[Wed Apr 11 06:33:56 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:56 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:33:56 2012] Source does appear to be extended
[Wed Apr 11 06:33:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Wed Apr 11 06:33:56 2012] Source is confused with source 3
[Wed Apr 11 06:33:56 2012] Source is confused with source 6
[Wed Apr 11 06:33:56 2012] Source is confused with source 18
[Wed Apr 11 06:33:56 2012] Source is confused with source 17
[Wed Apr 11 06:34:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:34:15 2012] Initial guess for spatial extent in simple fitting = 24.13"
[Wed Apr 11 06:34:15 2012] source mask rpix=5.5, npix_max = 146, mask sum = 146, frac = 0.998
[Wed Apr 11 06:34:15 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 24.13"
[Wed Apr 11 06:34:15 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Apr 11 06:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src6.csv
[Wed Apr 11 06:34:15 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Apr 11 06:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src6.csv
[Wed Apr 11 06:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Apr 11 06:34:16 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Apr 11 06:34:36 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Wed Apr 11 06:34:36 2012] Spatial fit model total counts = 2580.180000, observed total counts = 2657.000000
[Wed Apr 11 06:34:36 2012] Offset between fit and detection position for source 4 = 3.843983 pixels
[Wed Apr 11 06:34:36 2012] Warning, changing simple spatial fit ID from 6 to 9
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.843983 pixels
  Position = (501.4, 293.1) = 3 38 30.56 -35 26 41.4
  Extent = 23.7 (23.5-24.6)", rotation angle = 0
  Source counts = 2414.0 +/- 49.1
  Background counts = 0.0
  Rate = 0.05 +/- 0.001
[Wed Apr 11 06:34:36 2012] Spatial fit model total counts = 5391.180000, observed total counts = 5627.000000
[Wed Apr 11 06:34:36 2012] Offset between fit and detection position for source 4 = 2.262087 pixels
[Wed Apr 11 06:34:36 2012] Warning, changing simple spatial fit ID from 9 to 28
[Wed Apr 11 06:34:36 2012] 4209.600000 total counts/ 1984.620000 bgd. counts: snr = 49.944472
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.262087 pixels
  Position = (499.1, 292.8) = 3 38 31.36 -35 26 42.6
  Extent = 20.7 (19.7-21.3)", rotation angle = 0
  Source counts = 2225.0 +/- 64.9
  Background counts = 1984.6
  Rate = 0.05 +/- 0.001
[Wed Apr 11 06:34:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:36 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:34:36 2012] Source does appear to be extended
[Wed Apr 11 06:34:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:33:25 2012] Counts = 2224.980000, rescaling region sizes by 2.000000
[Wed Apr 11 07:33:25 2012] XMMSAS src. selection expression = ellipse(43374.792000, 25428.906000, 2481.048071, 2481.048071, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing source region out to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src4_src.reg
[Wed Apr 11 07:33:25 2012] Extracting stamp from image fullrun_mos2_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (357, 150) - (595, 435)
[Wed Apr 11 07:33:25 2012] XMMSAS bgd. selection expression = annulus(43374.792000, 25428.906000, 8270.160238, 16540.320476, X, Y) && !ellipse(38351.183180, 14686.663920, 979.032028, 979.032028, 0.000000, X, Y) && !ellipse(40934.043760, 19577.442000, 366.640811, 366.640811, 0.000000, X, Y) && !ellipse(38464.537231, 25366.688293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33410.195129, 23622.551758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31442.329895, 22244.777405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42757.820000, 24777.218000, 2314.096067, 2314.096067, 0.000000, X, Y) && !ellipse(26554.800629, 15458.414993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.147095, 34771.199387, 549.706941, 230.919348, 34.406129, X, Y) && !ellipse(34019.973053, 24921.320404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.269800, 28831.533200, 314.893609, 314.893609, 0.000000, X, Y) && !ellipse(43305.457458, 26134.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34340.119141, 19861.242111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28341.932709, 20244.231415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39194.529572, 23166.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39862.771240, 30041.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33546.756561, 26144.564087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43320.779633, 20288.918213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43880.276000, 26184.350000, 2072.896060, 2072.896060, 0.000000, X, Y) && !ellipse(26513.793600, 20659.190400, 432.740012, 432.740012, 0.000000, X, Y) && !ellipse(44236.873596, 26797.549957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40426.487061, 17718.184769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28652.977480, 24178.273000, 377.803211, 377.803211, 0.000000, X, Y) && !ellipse(38916.871918, 15999.008163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33712.077271, 40946.126740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36601.726196, 15176.721695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31526.255200, 38635.961600, 600.658385, 600.658385, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src4.gif
[Wed Apr 11 07:35:17 2012] Mean detx,y = (-12211.94, 8949.73) 
[Wed Apr 11 07:35:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 07:38:14 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 07:38:14 2012] Setting source spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Apr 11 07:38:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Apr 11 08:36:51 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:51 2012] Error reading totcts from fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Apr 11 08:36:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:51 2012] Using photon index=1.80, rate=0.0462, arf fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src4.arf
[Wed Apr 11 08:36:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:51 2012] Updating source flux to 1.1e-12
[Wed Apr 11 08:39:11 2012] Flag c found in src. 4 procflags, skipping spectral fitting