[Wed Apr 11 06:33:01 2012] Detection parameters:
  Position = (504.3, 305.7) = 3 38 29.53 -35 25 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.2 +/- 20.7
  Background counts = 88.7
  Rate = 0.002 +/- 0.0004

[Wed Apr 11 06:33:02 2012] Off-axis axis estimate = 14.93'
[Wed Apr 11 06:33:34 2012] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:34 2012] Initial guess for spatial extent in simple fitting = 13.90"
[Wed Apr 11 06:33:34 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.897
[Wed Apr 11 06:33:34 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.90"
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Apr 11 06:33:34 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Apr 11 06:33:34 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Apr 11 06:33:35 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Apr 11 06:33:35 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Apr 11 06:33:35 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Apr 11 06:33:56 2012] Warning, spatial fit 28 centroid is now closest to src. 4
[Wed Apr 11 06:33:56 2012] Spatial fit model total counts = 1524.240000, observed total counts = 1559.000000
[Wed Apr 11 06:33:56 2012] Offset between fit and detection position for source 18 = 3.783450 pixels
[Wed Apr 11 06:33:56 2012] Warning, changing simple spatial fit ID from 28 to 33
[Wed Apr 11 06:33:56 2012] 1550.897400 total counts/ 31.937400 bgd. counts: snr = 268.779758
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.783450 pixels
  Position = (505.8, 302.2) = 3 38 28.99 -35 26 1.7
  Extent = 28.1 (28.1-56.3)", rotation angle = 0
  Source counts = 1519.0 +/- 39.4
  Background counts = 31.9
  Rate = 0.03 +/- 0.0008
[Wed Apr 11 06:33:56 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:56 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:33:56 2012] Source does appear to be extended
[Wed Apr 11 06:33:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:33:56 2012] Source is confused with source 4
[Wed Apr 11 06:34:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:34:15 2012] Initial guess for spatial extent in simple fitting = 28.14"
[Wed Apr 11 06:34:15 2012] source mask rpix=6.5, npix_max = 194, mask sum = 177, frac = 0.911
[Wed Apr 11 06:34:15 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 28.14"
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Apr 11 06:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src28.csv
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Apr 11 06:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src28.csv
[Wed Apr 11 06:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Apr 11 06:34:16 2012] fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Apr 11 06:34:16 2012] Fit fullrun_mos2_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Apr 11 06:34:36 2012] Warning, spatial fit 28 centroid is now closest to src. 4
[Wed Apr 11 06:34:36 2012] Spatial fit model total counts = 1550.420000, observed total counts = 1559.000000
[Wed Apr 11 06:34:36 2012] Offset between fit and detection position for source 18 = 1.116128 pixels
[Wed Apr 11 06:34:36 2012] Warning, changing simple spatial fit ID from 28 to 33
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.116128 pixels
  Position = (504.9, 301.5) = 3 38 29.30 -35 26 4.8
  Extent = 25.9 (23.7-28.1)", rotation angle = 0
  Source counts = 1028.6 +/- 32.1
  Background counts = 0.0
  Rate = 0.02 +/- 0.0007
[Wed Apr 11 06:34:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:36 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:34:36 2012] Source does appear to be extended
[Wed Apr 11 06:34:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:33:25 2012] Counts = 1028.640000, rescaling region sizes by 2.000000
[Wed Apr 11 07:33:25 2012] XMMSAS src. selection expression = ellipse(43880.276000, 26184.350000, 3109.344089, 3109.344089, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing source region out to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src18_src.reg
[Wed Apr 11 07:33:25 2012] Extracting stamp from image fullrun_mos2_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (326, 123) - (595, 480)
[Wed Apr 11 07:33:25 2012] XMMSAS bgd. selection expression = annulus(43880.276000, 26184.350000, 10364.480298, 20728.960596, X, Y) && !ellipse(38351.183180, 14686.663920, 979.032028, 979.032028, 0.000000, X, Y) && !ellipse(40934.043760, 19577.442000, 366.640811, 366.640811, 0.000000, X, Y) && !ellipse(25894.002700, 28480.798800, 364.280810, 364.280810, 0.000000, X, Y) && !ellipse(38464.537231, 25366.688293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33410.195129, 23622.551758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43374.792000, 25428.906000, 1654.032048, 1654.032048, 0.000000, X, Y) && !ellipse(31442.329895, 22244.777405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42757.820000, 24777.218000, 2314.096067, 2314.096067, 0.000000, X, Y) && !ellipse(26554.800629, 15458.414993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.147095, 34771.199387, 549.706941, 230.919348, 34.406129, X, Y) && !ellipse(34019.973053, 24921.320404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.269800, 28831.533200, 314.893609, 314.893609, 0.000000, X, Y) && !ellipse(43305.457458, 26134.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34340.119141, 19861.242111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28341.932709, 20244.231415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39194.529572, 23166.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39862.771240, 30041.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33546.756561, 26144.564087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.176400, 31084.983780, 362.148010, 362.148010, 0.000000, X, Y) && !ellipse(43320.779633, 20288.918213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.793600, 20659.190400, 432.740012, 432.740012, 0.000000, X, Y) && !ellipse(44236.873596, 26797.549957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40426.487061, 17718.184769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28652.977480, 24178.273000, 377.803211, 377.803211, 0.000000, X, Y) && !ellipse(24320.334400, 28932.799860, 1255.928036, 1255.928036, 0.000000, X, Y) && !ellipse(38916.871918, 15999.008163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33712.077271, 40946.126740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.126007, 27417.727631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36601.726196, 15176.721695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31526.255200, 38635.961600, 600.658385, 600.658385, 0.000000, X, Y)
[Wed Apr 11 07:33:25 2012] Writing fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src18.gif
[Wed Apr 11 07:47:25 2012] Mean detx,y = (-11962.16, 9253.66) 
[Wed Apr 11 07:47:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 07:50:54 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 07:50:54 2012] Setting source spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Apr 11 07:50:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Apr 11 08:36:51 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:51 2012] Error reading totcts from fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Apr 11 08:36:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:52 2012] Using photon index=1.80, rate=0.0213, arf fullrun_mos2_xmm0055140101_pi300-10000_pass1_cl_src18.arf
[Wed Apr 11 08:36:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:52 2012] Updating source flux to 5e-13
[Wed Apr 11 08:39:11 2012] Flag c found in src. 18 procflags, skipping spectral fitting