[Wed Apr 11 06:33:00 2012] Detection parameters:
  Position = (332.3, 300.5) = 3 39 30.73 -35 26 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.2 +/- 14.1
  Background counts = 52.0
  Rate = 0.002 +/- 0.0003

[Wed Apr 11 06:33:01 2012] Off-axis axis estimate = 2.46'
[Wed Apr 11 06:33:33 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:33:33 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed Apr 11 06:33:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.223
[Wed Apr 11 06:33:33 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.66"
[Wed Apr 11 06:33:33 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_src40.ximg exists
[Wed Apr 11 06:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_src40.csv
[Wed Apr 11 06:33:33 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Apr 11 06:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_src40.csv
[Wed Apr 11 06:33:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:33:34 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Apr 11 06:33:34 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Apr 11 06:33:34 2012] Fit fullrun_mos1_xmm0055140101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Wed Apr 11 06:33:51 2012] Spatial fit model total counts = 535.982000, observed total counts = 536.000000
[Wed Apr 11 06:33:51 2012] Offset between fit and detection position for source 26 = 2.009221 pixels
[Wed Apr 11 06:33:51 2012] 530.998000 total counts/ 378.542000 bgd. counts: snr = 7.835875
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.009221 pixels
  Position = (330.3, 300.4) = 3 39 31.45 -35 26 11.2
  Extent = 15.3 (15.3-15.3)", rotation angle = 0
  Source counts = 152.5 +/- 23.0
  Background counts = 378.5
  Rate = 0.003 +/- 0.0005
[Wed Apr 11 06:33:51 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:33:51 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:33:51 2012] Source does appear to be extended
[Wed Apr 11 06:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:34:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:34:13 2012] Initial guess for spatial extent in simple fitting = 15.31"
[Wed Apr 11 06:34:13 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.990
[Wed Apr 11 06:34:13 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 15.31"
[Wed Apr 11 06:34:14 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_src37.ximg exists
[Wed Apr 11 06:34:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_src37.csv
[Wed Apr 11 06:34:14 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Apr 11 06:34:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_src37.csv
[Wed Apr 11 06:34:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:34:15 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Apr 11 06:34:15 2012] fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Apr 11 06:34:15 2012] Fit fullrun_mos1_xmm0055140101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed Apr 11 06:34:31 2012] Warning, spatial fit 37 centroid is now closest to src. 36
[Wed Apr 11 06:34:31 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:34:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:34:31 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:34:31 2012] Source does appear to be extended
[Wed Apr 11 06:34:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:35:07 2012] XMMSAS src. selection expression = ellipse(28690.170400, 26082.987000, 918.552026, 918.552026, 0.000000, X, Y)
[Wed Apr 11 06:35:07 2012] Not overwriting source region fullrun_mos1_xmm0055140101_pi300-10000_pass1_cl_src26_src.reg
[Wed Apr 11 06:35:07 2012] Extracting stamp from image fullrun_mos1_xmm0055140101_pi300-10000_cl_sm2.00.img.gz, (278, 248) - (383, 353)
[Wed Apr 11 06:35:07 2012] XMMSAS bgd. selection expression = annulus(28690.170400, 26082.987000, 1530.920044, 3061.840088, X, Y) && !ellipse(25904.143800, 28480.072800, 389.528811, 389.528811, 0.000000, X, Y) && !ellipse(31440.789978, 22238.208862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27053.830400, 28845.704000, 325.812809, 325.812809, 0.000000, X, Y)
[Wed Apr 11 06:35:07 2012] Writing fullrun_mos1_xmm0055140101_pi300-10000_pass1_cl_src26.gif
[Wed Apr 11 06:37:45 2012] Mean detx,y = (425.19, 704.60) 
[Wed Apr 11 06:37:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 06:37:52 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 06:37:52 2012] Setting source spectrum file to fullrun_mos1_xmm0055140101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Apr 11 06:37:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0055140101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Apr 11 08:36:50 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:36:50 2012] Error reading totcts from fullrun_mos1_xmm0055140101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Apr 11 08:36:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:36:51 2012] Using photon index=1.80, rate=0.00317, arf fullrun_mos1_xmm0055140101_pi300-10000_pass1_cl_src26.arf
[Wed Apr 11 08:36:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:36:51 2012] Updating source flux to 2.9e-14