[Sat Sep 24 22:25:03 2011] Detection parameters:
  Position = (473.7, 219.1) = 11 23 37.10 38 41 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.9 +/- 15.6
  Background counts = 25.0
  Rate = 0.003 +/- 0.0004

[Sat Sep 24 22:25:03 2011] Off-axis axis estimate = 13.95'
[Sat Sep 24 23:03:19 2011] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 23:03:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 23:03:19 2011] Initial guess for spatial extent in simple fitting = 13.40"
[Sat Sep 24 23:03:19 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sat Sep 24 23:03:19 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 13.40"
[Sat Sep 24 23:21:26 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass0_src9.ximg exists
[Sat Sep 24 23:21:26 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Sep 24 23:21:26 2011] Fit fullrun_mos1_xmm0052140201_pi300-10000_cl_pass0_src9 appears to have run properly
[Sat Sep 24 23:21:26 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Sep 24 23:21:26 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Sep 24 23:21:26 2011] Fit fullrun_mos1_xmm0052140201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Sep 24 23:48:13 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.019047 pixels away
[Sat Sep 24 23:48:13 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 23:48:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 23:48:13 2011] Assessing source extent using major
[Sat Sep 24 23:48:13 2011] Source does appear to be extended
[Sat Sep 24 23:48:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:18:13 2011] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:18:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 00:18:13 2011] Initial guess for spatial extent in simple fitting = 13.40"
[Sun Sep 25 00:18:13 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sun Sep 25 00:18:13 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 13.40"
[Sun Sep 25 00:34:48 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_src8.ximg exists
[Sun Sep 25 00:34:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_src8.csv
[Sun Sep 25 00:34:48 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Sep 25 00:34:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_src8.csv
[Sun Sep 25 00:34:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:34:48 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Sep 25 00:34:48 2011] fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Sep 25 00:34:48 2011] Fit fullrun_mos1_xmm0052140201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Sep 25 00:57:40 2011] Spatial fit model total counts = 272.465000, observed total counts = 246.000000
[Sun Sep 25 00:57:40 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Sep 25 00:57:40 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:57:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:57:40 2011] Assessing source extent using major
[Sun Sep 25 00:57:40 2011] Source does appear to be extended
[Sun Sep 25 00:57:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 03:02:54 2011] XMMSAS src. selection expression = ellipse(41164.433868, 19015.971054, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 03:02:54 2011] Writing source region out to fullrun_mos1_xmm0052140201_pi300-10000_pass1_cl_src3_src.reg
[Sun Sep 25 03:02:54 2011] Extracting stamp from image fullrun_mos1_xmm0052140201_pi300-10000_cl_sm2.00.img.gz, (436, 182) - (511, 257)
[Sun Sep 25 03:02:54 2011] XMMSAS bgd. selection expression = annulus(41164.433868, 19015.971054, 1087.500000, 2175.000000, X, Y)
[Sun Sep 25 03:02:54 2011] Writing fullrun_mos1_xmm0052140201_pi300-10000_pass1_cl_src3.gif
[Sun Sep 25 03:05:17 2011] Mean detx,y = (11546.94, -11921.51) 
[Sun Sep 25 03:05:18 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 03:05:34 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 03:05:34 2011] Setting source spectrum file to fullrun_mos1_xmm0052140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Sep 25 03:05:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0052140201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Sep 25 03:22:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Sep 25 03:22:32 2011] rmf not generated due to insufficient counts
[Sun Sep 25 03:32:39 2011] Updating aperture counts using extracted products
[Sun Sep 25 03:32:39 2011] Error reading totcts from fullrun_mos1_xmm0052140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Sep 25 03:32:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:32:39 2011] Using photon index=1.80, rate=0.00303, arf fullrun_mos1_xmm0052140201_pi300-10000_pass1_cl_src3.arf
[Sun Sep 25 03:32:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:32:39 2011] Updating source flux to 1e-13
[Sun Sep 25 03:32:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting