[Thu Jun 13 09:16:38 2013] Detection parameters:
  Position = (429.5, 423.6) = 18 28 27.10 -11 17 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.2 +/- 6.5
  Background counts = 4.8
  Rate = 0.005 +/- 0.001

[Thu Jun 13 09:16:38 2013] Off-axis axis estimate = 13.14'
[Thu Jun 13 09:17:47 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:17:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 09:17:47 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Thu Jun 13 09:17:47 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.007
[Thu Jun 13 09:17:47 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.00"
[Thu Jun 13 09:22:24 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 13 09:22:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_src2.csv
[Thu Jun 13 09:22:24 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 13 09:22:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_src2.csv
[Thu Jun 13 09:22:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:22:24 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 13 09:22:24 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 13 09:22:24 2013] Fit fullrun_pn_xmm0051940601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 13 09:29:15 2013] Spatial fit model total counts = 39.268300, observed total counts = 35.000000
[Thu Jun 13 09:29:15 2013] Offset between fit and detection position for source 2 = 0.501480 pixels
[Thu Jun 13 09:29:15 2013] 38.270700 total counts/ 14.604100 bgd. counts: snr = 6.192963
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.501480 pixels
  Position = (429.3, 423.2) = 18 28 27.15 -11 17 54.3
  Extent = 23.4 (18.3-26.0)" x 3.3 (3.2-4.7)", rotation angle = 46 (37-52) degrees
  Source counts = 23.7 +/- 6.2
  Background counts = 14.6
  Rate = 0.02 +/- 0.005
[Thu Jun 13 09:29:15 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:29:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:29:15 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 09:29:15 2013] Source does appear to be extended
[Thu Jun 13 09:29:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.90
[Thu Jun 13 09:29:15 2013] Source is asymmetric
[Thu Jun 13 09:29:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:29:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 09:29:20 2013] Initial guess for spatial extent in simple fitting = 13.37"
[Thu Jun 13 09:29:20 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.960
[Thu Jun 13 09:29:20 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 13.37"
[Thu Jun 13 09:34:10 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 13 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 09:34:10 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 13 09:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 09:34:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:34:10 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 13 09:34:10 2013] fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 13 09:34:10 2013] Fit fullrun_pn_xmm0051940601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun 13 09:41:00 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Thu Jun 13 09:41:00 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:41:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:41:00 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 09:41:00 2013] Source does appear to be extended
[Thu Jun 13 09:41:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.90
[Thu Jun 13 09:41:00 2013] Source is asymmetric
[Thu Jun 13 09:41:04 2013] XMMSAS src. selection expression = ellipse(37303.761400, 36767.854600, 1406.544040, 197.494806, 46.296496, X, Y)
[Thu Jun 13 09:41:04 2013] Writing source region out to fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 09:41:04 2013] Extracting stamp from image fullrun_pn_xmm0051940601_pi300-10000_cl_sm2.00.img.gz, (349, 342) - (510, 504)
[Thu Jun 13 09:41:04 2013] XMMSAS bgd. selection expression = annulus(37303.761400, 36767.854600, 2344.240067, 4688.480135, X, Y) && !ellipse(31925.000600, 37614.844600, 746.122421, 334.429610, 32.739019, X, Y)
[Thu Jun 13 09:41:04 2013] Writing fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 09:41:28 2013] Mean detx,y = (-12461.93, 12156.00) 
[Thu Jun 13 09:41:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 09:42:28 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 09:42:28 2013] Setting source spectrum file to fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 09:42:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 09:43:01 2013] Not generating rmf since there are only 23 counts
[Thu Jun 13 09:43:01 2013] rmf not generated due to insufficient counts
[Thu Jun 13 09:50:27 2013] Updating aperture counts using extracted products
[Thu Jun 13 09:50:27 2013] Total counts from fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 15.00
[Thu Jun 13 09:50:27 2013] Total counts from fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 223.00
[Thu Jun 13 09:50:27 2013] Got source and background scale factors 725624.000000, 20856986.000000
[Thu Jun 13 09:50:27 2013] User source parameters:
  Position = (429.3, 423.2) = 18 28 27.15 -11 17 54.3
  Extent = 23.4 (18.3-26.0)" x 3.3 (3.2-4.7)", rotation angle = 46 (37-52) degrees
  Source aperture counts = 7.2 +/- 5.0
  Background aperture counts = 7.8
  Rate = 0.006 +/- 0.004

[Thu Jun 13 09:50:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 09:50:27 2013] Using photon index=1.80, rate=0.0192, arf fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 09:50:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 09:50:27 2013] Updating source flux to 5.3e-13
[Thu Jun 13 09:50:31 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 09:50:32 2013] xmm0051940601/analysis//spectral/fullrun_pn_xmm0051940601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete