[Tue May 28 02:07:27 2013] Detection parameters:
  Position = (346.6, 455.4) = 18 26 21.54 -10 56 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.9 +/- 5.9
  Background counts = 2.9
  Rate = 0.002 +/- 0.0006

[Tue May 28 02:07:27 2013] Off-axis axis estimate = 11.91'
[Tue May 28 02:28:39 2013] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:28:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 28 02:28:39 2013] Initial guess for spatial extent in simple fitting = 12.38"
[Tue May 28 02:28:39 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.094
[Tue May 28 02:28:39 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 12.38"
[Tue May 28 02:38:39 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 28 02:38:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_src4.csv
[Tue May 28 02:38:39 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 28 02:38:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_src4.csv
[Tue May 28 02:38:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:38:39 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 28 02:38:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 28 02:38:39 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 28 02:38:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 28 02:38:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051940501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:38:46 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.322739 pixels away
[Tue May 28 02:38:46 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:38:46 2013] Assessing source extent using major
[Tue May 28 02:38:46 2013] Source does appear to be extended
[Tue May 28 02:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:59:17 2013] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:59:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 28 02:59:17 2013] Initial guess for spatial extent in simple fitting = 12.38"
[Tue May 28 02:59:17 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.094
[Tue May 28 02:59:17 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 12.38"
[Tue May 28 03:07:41 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass1_src4.ximg exists
[Tue May 28 03:07:41 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May 28 03:07:41 2013] Fit fullrun_mos2_xmm0051940501_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue May 28 03:07:41 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May 28 03:07:41 2013] fullrun_mos2_xmm0051940501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May 28 03:07:41 2013] Fit fullrun_mos2_xmm0051940501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue May 28 03:07:49 2013] Spatial fit model total counts = 45.494000, observed total counts = 43.000000
[Tue May 28 03:07:49 2013] Offset between fit and detection position for source 4 = 0.215035 pixels
[Tue May 28 03:07:49 2013] 46.566700 total counts/ 29.434700 bgd. counts: snr = 3.157754
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.215035 pixels
  Position = (346.4, 455.5) = 18 26 21.60 -10 56 9.0
  Extent = 6.5 (3.8-10.3)", rotation angle = 0
  Source counts = 17.1 +/- 6.8
  Background counts = 29.4
  Rate = 0.002 +/- 0.0007
[Tue May 28 03:07:49 2013] Vigneting correction estimate = 1.000000
[Tue May 28 03:07:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 03:07:49 2013] Assessing source extent using major axis lower bound
[Tue May 28 03:07:49 2013] Source does appear to be extended
[Tue May 28 03:07:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 03:16:21 2013] XMMSAS src. selection expression = ellipse(30086.348240, 39581.103790, 387.067308, 387.067308, 0.000000, X, Y)
[Tue May 28 03:16:21 2013] Writing source region out to fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4_src.reg
[Tue May 28 03:16:21 2013] Extracting stamp from image fullrun_mos2_xmm0051940501_pi300-10000_cl_sm2.00.img.gz, (324, 433) - (369, 478)
[Tue May 28 03:16:21 2013] XMMSAS bgd. selection expression = annulus(30086.348240, 39581.103790, 645.112180, 1290.224359, X, Y)
[Tue May 28 03:16:21 2013] Writing fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4.gif
[Tue May 28 03:18:02 2013] Mean detx,y = (5298.35, -15318.91) 
[Tue May 28 03:18:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 03:18:23 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 03:18:24 2013] Setting source spectrum file to fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 28 03:18:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 28 03:18:53 2013] Not generating rmf since there are only 17 counts
[Tue May 28 03:18:53 2013] rmf not generated due to insufficient counts
[Tue May 28 03:19:19 2013] Updating aperture counts using extracted products
[Tue May 28 03:19:19 2013] Total counts from fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 23.00
[Tue May 28 03:19:19 2013] Total counts from fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4_bgd.pi.gz = 66.00
[Tue May 28 03:19:19 2013] Got source and background scale factors 473600.000000, 3539780.000000
[Tue May 28 03:19:19 2013] User source parameters:
  Position = (346.4, 455.5) = 18 26 21.60 -10 56 9.0
  Extent = 6.5 (3.8-10.3)", rotation angle = 0
  Source aperture counts = 14.2 +/- 5.9
  Background aperture counts = 8.8
  Rate = 0.001 +/- 0.0006

[Tue May 28 03:19:19 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 03:19:19 2013] Using photon index=1.80, rate=0.00174, arf fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4.arf
[Tue May 28 03:19:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 03:19:19 2013] Updating source flux to 1e-13
[Tue May 28 03:19:22 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 03:19:23 2013] xmm0051940501/analysis//spectral/fullrun_mos2_xmm0051940501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete