[Thu Jul 19 10:12:40 2012] Detection parameters:
  Position = (295.9, 301.5) = 18 28 21.23 -11 47 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.0 +/- 6.8
  Background counts = 4.5
  Rate = 0.003 +/- 0.0008

[Thu Jul 19 10:12:40 2012] Off-axis axis estimate = 0.29'
[Thu Jul 19 10:34:19 2012] Using EEF radius (= 6.57 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 10:34:19 2012] Initial guess for spatial extent in simple fitting = 6.57"
[Thu Jul 19 10:34:19 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.989
[Thu Jul 19 10:34:19 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 6.57"
[Thu Jul 19 10:53:19 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jul 19 10:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_src8.csv
[Thu Jul 19 10:53:19 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jul 19 10:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_src8.csv
[Thu Jul 19 10:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 10:53:19 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jul 19 10:53:19 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jul 19 10:53:19 2012] Fit fullrun_mos2_xmm0051940401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jul 19 10:53:26 2012] Spatial fit model total counts = 74.830900, observed total counts = 74.000000
[Thu Jul 19 10:53:26 2012] Offset between fit and detection position for source 7 = 0.655854 pixels
[Thu Jul 19 10:53:26 2012] 74.648400 total counts/ 58.362000 bgd. counts: snr = 2.131867
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.655854 pixels
  Position = (295.2, 301.4) = 18 28 21.42 -11 47 51.2
  Extent = 6.3 (2.1-9.7)", rotation angle = 0
  Source counts = 16.3 +/- 8.6
  Background counts = 58.4
  Rate = 0.002 +/- 0.0009
[Thu Jul 19 10:53:26 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 10:53:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 10:53:26 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 10:53:26 2012] Source does appear to be extended
[Thu Jul 19 10:53:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 11:16:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 11:16:44 2012] Initial guess for spatial extent in simple fitting = 6.31"
[Thu Jul 19 11:16:44 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.052
[Thu Jul 19 11:16:44 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 6.31"
[Thu Jul 19 11:33:13 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jul 19 11:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_src8.csv
[Thu Jul 19 11:33:13 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jul 19 11:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_src8.csv
[Thu Jul 19 11:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 11:33:13 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jul 19 11:33:13 2012] fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jul 19 11:33:13 2012] Fit fullrun_mos2_xmm0051940401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jul 19 11:33:22 2012] Warning, spatial fit 8 centroid is now closest to src. 2
[Thu Jul 19 11:33:22 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 11:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 11:33:22 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 11:33:22 2012] Source does appear to be extended
[Thu Jul 19 11:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 11:49:25 2012] XMMSAS src. selection expression = ellipse(25636.356400, 26172.336600, 378.394811, 378.394811, 0.000000, X, Y)
[Thu Jul 19 11:49:25 2012] Writing source region out to fullrun_mos2_xmm0051940401_pi300-10000_pass1_cl_src7_src.reg
[Thu Jul 19 11:49:25 2012] Extracting stamp from image fullrun_mos2_xmm0051940401_pi300-10000_cl_sm2.00.img.gz, (273, 280) - (317, 323)
[Thu Jul 19 11:49:25 2012] XMMSAS bgd. selection expression = annulus(25636.356400, 26172.336600, 630.658018, 1261.316036, X, Y) && !ellipse(24986.674400, 26708.706000, 357.344010, 357.344010, 0.000000, X, Y)
[Thu Jul 19 11:49:25 2012] Writing fullrun_mos2_xmm0051940401_pi300-10000_pass1_cl_src7.gif
[Thu Jul 19 11:51:32 2012] Mean detx,y = (905.54, -1890.32) 
[Thu Jul 19 11:51:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 11:51:40 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 11:51:40 2012] Setting source spectrum file to fullrun_mos2_xmm0051940401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul 19 11:51:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051940401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jul 19 11:56:30 2012] Not generating rmf since there are only 16 counts
[Thu Jul 19 11:56:30 2012] rmf not generated due to insufficient counts
[Thu Jul 19 11:56:57 2012] Updating aperture counts using extracted products
[Thu Jul 19 11:56:57 2012] Error reading totcts from fullrun_mos2_xmm0051940401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul 19 11:56:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 11:56:57 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0051940401_pi300-10000_pass1_cl_src7.arf
[Thu Jul 19 11:56:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 11:56:57 2012] Updating source flux to 2.1e-14
[Thu Jul 19 11:57:09 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting