[Sat Jun 16 01:43:19 2012] Detection parameters:
  Position = (283.1, 319.2) = 18 25 54.80 -11 27 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 9.3
  Background counts = 6.5
  Rate = 0.006 +/- 0.001

[Sat Jun 16 01:43:19 2012] Off-axis axis estimate = 1.87'
[Sat Jun 16 01:48:47 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 01:48:47 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 16 01:48:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sat Jun 16 01:48:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.36"
[Sat Jun 16 01:53:41 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 16 01:53:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_src3.csv
[Sat Jun 16 01:53:41 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 16 01:53:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_src3.csv
[Sat Jun 16 01:53:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 01:53:41 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 16 01:53:41 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 16 01:53:41 2012] Fit fullrun_mos1_xmm0051940301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 16 02:00:18 2012] Source 3 is offset by 5.082212 and -6.860129 pixels which is larger than
2 X fitted extent = 0.846400 x 0.846400, not incorporating fit results
[Sat Jun 16 02:00:18 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 02:00:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 02:00:18 2012] Assessing source extent using major
[Sat Jun 16 02:00:18 2012] Source does appear to be extended
[Sat Jun 16 02:00:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 02:03:36 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 02:03:36 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 16 02:03:36 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sat Jun 16 02:03:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.36"
[Sat Jun 16 02:08:45 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 16 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_src3.csv
[Sat Jun 16 02:08:45 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 16 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_src3.csv
[Sat Jun 16 02:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 02:08:45 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 16 02:08:45 2012] fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 16 02:08:45 2012] Fit fullrun_mos1_xmm0051940301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 16 02:13:12 2012] Spatial fit model total counts = 128.991000, observed total counts = 129.000000
[Sat Jun 16 02:13:12 2012] Offset between fit and detection position for source 3 = 0.104881 pixels
[Sat Jun 16 02:13:12 2012] 129.981500 total counts/ 105.318000 bgd. counts: snr = 2.403275
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.104881 pixels
  Position = (283.0, 319.1) = 18 25 54.83 -11 27 12.0
  Extent = 2.9 (2.1-4.3)", rotation angle = 0
  Source counts = 24.7 +/- 11.4
  Background counts = 105.3
  Rate = 0.003 +/- 0.001
[Sat Jun 16 02:13:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 02:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 02:13:12 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 02:13:12 2012] Source does appear to be extended
[Sat Jun 16 02:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 02:16:53 2012] XMMSAS src. selection expression = ellipse(24569.565980, 27715.236600, 172.225805, 172.225805, 0.000000, X, Y)
[Sat Jun 16 02:16:53 2012] Writing source region out to fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 16 02:16:53 2012] Extracting stamp from image fullrun_mos1_xmm0051940301_pi300-10000_cl_sm2.00.img.gz, (273, 309) - (293, 329)
[Sat Jun 16 02:16:53 2012] XMMSAS bgd. selection expression = annulus(24569.565980, 27715.236600, 287.043008, 574.086017, X, Y)
[Sat Jun 16 02:16:53 2012] Writing fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3.gif
[Sat Jun 16 02:17:38 2012] Mean detx,y = (-3254.59, -104.48) 
[Sat Jun 16 02:17:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 02:17:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 02:17:43 2012] Setting source spectrum file to fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 02:17:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 16 02:18:23 2012] Not generating rmf since there are only 24 counts
[Sat Jun 16 02:18:23 2012] rmf not generated due to insufficient counts
[Sat Jun 16 02:20:06 2012] Updating aperture counts using extracted products
[Sat Jun 16 02:20:06 2012] Error reading totcts from fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 02:20:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 02:20:06 2012] Using photon index=1.80, rate=0.0027, arf fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 02:20:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 02:20:06 2012] Updating source flux to 4.6e-14
[Sat Jun 16 02:20:07 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Sat Jun 16 02:20:07 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 16 02:20:08 2012] xmm0051940301/analysis//spectral/fullrun_mos1_xmm0051940301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete