[Fri Jun 21 10:20:57 2013] Detection parameters:
  Position = (230.8, 361.8) = 18 25 24.66 -11 45 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.9 +/- 18.9
  Background counts = 2.7
  Rate = 0.04 +/- 0.003

[Fri Jun 21 10:20:57 2013] Off-axis axis estimate = 6.72'
[Fri Jun 21 10:39:51 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:39:51 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Fri Jun 21 10:39:51 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.190
[Fri Jun 21 10:39:51 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.79"
[Fri Jun 21 10:45:47 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 21 10:45:47 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 21 10:45:47 2013] Fit fullrun_mos2_xmm0051940101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 21 10:45:47 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 21 10:45:47 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 21 10:45:47 2013] Fit fullrun_mos2_xmm0051940101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 21 10:45:52 2013] Spatial fit model total counts = 265.819000, observed total counts = 252.000000
[Fri Jun 21 10:45:52 2013] Offset between fit and detection position for source 1 = 0.305544 pixels
[Fri Jun 21 10:45:52 2013] 265.688000 total counts/ 65.611000 bgd. counts: snr = 24.700676
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.305544 pixels
  Position = (230.6, 361.5) = 18 25 24.72 -11 45 25.5
  Extent = 7.4 (6.4-8.5)" x 5.6 (4.9-6.4)", rotation angle = 325 (303-344) degrees
  Source counts = 200.1 +/- 16.3
  Background counts = 65.6
  Rate = 0.03 +/- 0.002
[Fri Jun 21 10:45:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:45:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:45:52 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:45:52 2013] Source does appear to be extended
[Fri Jun 21 10:45:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri Jun 21 11:05:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 11:05:33 2013] Initial guess for spatial extent in simple fitting = 6.54"
[Fri Jun 21 11:05:33 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Fri Jun 21 11:05:33 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.54"
[Fri Jun 21 11:11:09 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 21 11:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 11:11:09 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 21 11:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 11:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 11:11:09 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 21 11:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 11:11:09 2013] fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 21 11:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 11:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051940101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 11:11:16 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Jun 21 11:11:16 2013] Source 1 in spatial fitting is no longer close to this source
[Fri Jun 21 11:11:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 11:11:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 11:11:16 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 11:11:16 2013] Source does appear to be extended
[Fri Jun 21 11:11:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri Jun 21 11:25:03 2013] XMMSAS src. selection expression = ellipse(20016.451400, 31405.378200, 446.684413, 337.965010, 324.880623, X, Y)
[Fri Jun 21 11:25:03 2013] Writing source region out to fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 21 11:25:03 2013] Extracting stamp from image fullrun_mos2_xmm0051940101_pi300-10000_cl_sm2.00.img.gz, (205, 336) - (256, 387)
[Fri Jun 21 11:25:03 2013] XMMSAS bgd. selection expression = annulus(20016.451400, 31405.378200, 744.474021, 1488.948043, X, Y)
[Fri Jun 21 11:25:03 2013] Writing fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 21 11:25:06 2013] Mean detx,y = (-4443.45, -7392.99) 
[Fri Jun 21 11:25:08 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 11:25:33 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 11:25:34 2013] Setting source spectrum file to fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 21 11:25:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 21 11:30:43 2013] Updating aperture counts using extracted products
[Fri Jun 21 11:30:44 2013] Total counts from fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 204.00
[Fri Jun 21 11:30:44 2013] Total counts from fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 63.00
[Fri Jun 21 11:30:44 2013] Got source and background scale factors 458892.000000, 4506545.000000
[Fri Jun 21 11:30:44 2013] User source parameters:
  Position = (230.6, 361.5) = 18 25 24.72 -11 45 25.5
  Extent = 7.4 (6.4-8.5)" x 5.6 (4.9-6.4)", rotation angle = 325 (303-344) degrees
  Source aperture counts = 197.6 +/- 15.3
  Background aperture counts = 6.4
  Rate = 0.03 +/- 0.002

[Fri Jun 21 11:30:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 11:30:45 2013] Using photon index=1.80, rate=0.0258, arf fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 21 11:30:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 11:30:45 2013] Updating source flux to 7.7e-13
[Fri Jun 21 11:30:49 2013] xmm0051940101/analysis//spectral/fullrun_mos2_xmm0051940101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete