[Fri May 25 22:35:07 2012] Detection parameters:
  Position = (296.4, 321.1) = 14 6 21.93 22 23 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2893.0 +/- 64.7
  Background counts = 34.2
  Rate = 0.1 +/- 0.003

[Fri May 25 22:35:08 2012] Off-axis axis estimate = 1.65'
[Fri May 25 23:24:02 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri May 25 23:24:02 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri May 25 23:24:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Fri May 25 23:24:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri May 25 23:41:14 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 23:41:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_src1.csv
[Fri May 25 23:41:14 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 23:41:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_src1.csv
[Fri May 25 23:41:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 23:41:14 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 23:41:14 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 23:41:14 2012] Fit fullrun_mos2_xmm0051760201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 25 23:41:25 2012] Spatial fit model total counts = 2738.110000, observed total counts = 2649.000000
[Fri May 25 23:41:25 2012] Offset between fit and detection position for source 1 = 0.196578 pixels
[Fri May 25 23:41:25 2012] 2754.675000 total counts/ 889.215000 bgd. counts: snr = 62.557956
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.196578 pixels
  Position = (296.2, 321.2) = 14 6 21.99 22 23 44.2
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 1865.5 +/- 52.5
  Background counts = 889.2
  Rate = 0.1 +/- 0.003
[Fri May 25 23:41:25 2012] Vigneting correction estimate = 1.000000
[Fri May 25 23:41:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 23:41:25 2012] Assessing source extent using major axis lower bound
[Fri May 25 23:41:25 2012] Source does appear to be extended
[Fri May 25 23:41:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 00:28:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 00:28:23 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Sat May 26 00:28:23 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.036
[Sat May 26 00:28:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.23"
[Sat May 26 00:46:08 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 00:46:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_src1.csv
[Sat May 26 00:46:08 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 00:46:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_src1.csv
[Sat May 26 00:46:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 00:46:08 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 00:46:08 2012] fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 00:46:08 2012] Fit fullrun_mos2_xmm0051760201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 26 00:46:20 2012] Spatial fit model total counts = 2738.110000, observed total counts = 2649.000000
[Sat May 26 00:46:20 2012] Offset between fit and detection position for source 1 = 0.000002 pixels
[Sat May 26 00:46:20 2012] 2754.677000 total counts/ 889.207000 bgd. counts: snr = 62.558573
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000002 pixels
  Position = (296.2, 321.2) = 14 6 21.99 22 23 44.2
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 1865.5 +/- 52.5
  Background counts = 889.2
  Rate = 0.1 +/- 0.003
[Sat May 26 00:46:20 2012] Vigneting correction estimate = 1.000000
[Sat May 26 00:46:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 00:46:20 2012] Assessing source extent using major axis lower bound
[Sat May 26 00:46:20 2012] Source does appear to be extended
[Sat May 26 00:46:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 01:45:53 2012] Counts = 1865.470000, rescaling region sizes by 2.000000
[Sat May 26 01:45:53 2012] XMMSAS src. selection expression = ellipse(25718.978020, 27896.808000, 627.091218, 627.091218, 0.000000, X, Y)
[Sat May 26 01:45:53 2012] Writing source region out to fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1_src.reg
[Sat May 26 01:45:53 2012] Extracting stamp from image fullrun_mos2_xmm0051760201_pi300-10000_cl_sm2.00.img.gz, (260, 285) - (332, 357)
[Sat May 26 01:45:53 2012] XMMSAS bgd. selection expression = annulus(25718.978020, 27896.808000, 2090.304060, 4180.608120, X, Y) && !ellipse(21197.169840, 24920.261400, 449.672813, 449.672813, 0.000000, X, Y) && !ellipse(30196.625000, 25485.061200, 337.201610, 337.201610, 0.000000, X, Y)
[Sat May 26 01:45:53 2012] Writing fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1.gif
[Sat May 26 01:45:56 2012] Mean detx,y = (78.86, 22.21) 
[Sat May 26 01:45:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 01:46:10 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 01:46:10 2012] Setting source spectrum file to fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 01:46:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 26 01:57:48 2012] Updating aperture counts using extracted products
[Sat May 26 01:57:48 2012] Error reading totcts from fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 01:57:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 01:57:48 2012] Using photon index=1.80, rate=0.0968, arf fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1.arf
[Sat May 26 01:57:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 01:57:48 2012] Updating source flux to 1e-12
[Sat May 26 01:58:24 2012] Reading fit data from xmm0051760201/analysis//spectral/fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1_pl.csv
[Sat May 26 01:58:24 2012] Spectral fit parameter nH value = 1.27618e+21
[Sat May 26 01:58:24 2012] Spectral fit parameter PhoIndex value = 5.30775
[Sat May 26 01:58:24 2012] Failed to get F(0.3-8.0) from xmm0051760201/analysis//spectral/fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May 26 01:58:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 01:58:24 2012] Using Nh = 1.3e+21, photon index=5.31, rate=0.0968, arf fullrun_mos2_xmm0051760201_pi300-10000_pass1_cl_src1.arf
[Sat May 26 01:58:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 01:58:24 2012] Updating source flux to 6.8e-13