[Mon May 13 10:35:42 2013] Detection parameters:
  Position = (377.2, 174.5) = 12 46 13.40 2 11 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.2 +/- 10.2
  Background counts = 34.9
  Rate = 0.007 +/- 0.001

[Mon May 13 10:35:42 2013] Off-axis axis estimate = 10.65'
[Mon May 13 10:37:35 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Mon May 13 10:37:35 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Mon May 13 10:37:35 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.805
[Mon May 13 10:37:35 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.75"
[Mon May 13 11:45:42 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_src26.ximg exists
[Mon May 13 11:45:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_src26.csv
[Mon May 13 11:45:42 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon May 13 11:45:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_src26.csv
[Mon May 13 11:45:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:45:42 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon May 13 11:45:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May 13 11:45:42 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon May 13 11:45:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May 13 11:45:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:11:38 2013] Source 26 is offset by 3.495198 and -4.295465 pixels which is larger than
2 X fitted extent = 10.806575 x 2.469021, not incorporating fit results
[Mon May 13 12:11:38 2013] Vigneting correction estimate = 1.000000
[Mon May 13 12:11:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 12:11:38 2013] Assessing source extent using major
[Mon May 13 12:11:38 2013] Source does appear to be extended
[Mon May 13 12:11:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 12:11:38 2013] Source is confused with source 25
[Mon May 13 12:11:48 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:11:48 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Mon May 13 12:11:48 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.805
[Mon May 13 12:11:48 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.75"
[Mon May 13 13:19:24 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_src25.ximg exists
[Mon May 13 13:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_src25.csv
[Mon May 13 13:19:24 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon May 13 13:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_src25.csv
[Mon May 13 13:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:19:24 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon May 13 13:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon May 13 13:19:24 2013] fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May 13 13:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon May 13 13:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:37:46 2013] Source 26 is offset by 3.343037 and -4.178730 pixels which is larger than
2 X fitted extent = 2.438759 x 10.806575, not incorporating fit results
[Mon May 13 13:37:46 2013] Vigneting correction estimate = 1.000000
[Mon May 13 13:37:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 13:37:46 2013] Assessing source extent using major
[Mon May 13 13:37:46 2013] Source does appear to be extended
[Mon May 13 13:37:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 13:37:55 2013] XMMSAS src. selection expression = ellipse(32767.792206, 15131.814529, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 13:37:55 2013] Writing source region out to fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26_src.reg
[Mon May 13 13:37:55 2013] Extracting stamp from image fullrun_pn_xmm0051760101_pi300-10000_cl_sm2.00.img.gz, (340, 137) - (415, 212)
[Mon May 13 13:37:55 2013] XMMSAS bgd. selection expression = annulus(32767.792206, 15131.814529, 1087.500000, 2175.000000, X, Y) && !ellipse(30706.043800, 18967.654000, 1940.928056, 359.323210, 66.677000, X, Y) && !ellipse(31393.067600, 17659.145200, 1696.984049, 373.168011, 63.434300, X, Y) && !ellipse(31502.754600, 17441.383000, 1723.944050, 407.151212, 62.062600, X, Y) && !ellipse(32246.163910, 16115.148438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.542800, 15708.618000, 1806.384052, 475.259214, 67.726100, X, Y)
[Mon May 13 13:37:55 2013] Writing fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26.gif
[Mon May 13 13:59:58 2013] Mean detx,y = (169.98, 13975.86) 
[Mon May 13 14:00:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:00:17 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:00:18 2013] Setting source spectrum file to fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon May 13 14:00:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon May 13 15:19:19 2013] Not generating rmf since there are only 53 counts
[Mon May 13 15:19:19 2013] rmf not generated due to insufficient counts
[Mon May 13 15:42:48 2013] Updating aperture counts using extracted products
[Mon May 13 15:42:48 2013] Total counts from fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 207.00
[Mon May 13 15:42:48 2013] Total counts from fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 493.00
[Mon May 13 15:42:48 2013] Got source and background scale factors 761088.000000, 1807149.000000
[Mon May 13 15:42:48 2013] User source parameters:
  Position = (377.2, 174.5) = 12 46 13.40 2 11 16.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -0.6 +/- 15.4
  Background aperture counts = 207.6
  Rate = -9e-05 +/- 0.002

[Mon May 13 15:42:48 2013] Updating counts from extracted products
[Mon May 13 15:42:48 2013] Set source signif. to -0.63/14.41 = -0.04
[Mon May 13 15:42:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 15:42:49 2013] Using photon index=1.80, rate=-9.29e-05, arf fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26.arf
[Mon May 13 15:42:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 15:42:49 2013] Updated flux is not positive, keeping original flux
[Mon May 13 15:42:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 15:43:03 2013] xmm0051760101/analysis//spectral/fullrun_pn_xmm0051760101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete