[Mon May 13 10:36:19 2013] Detection parameters:
  Position = (301.7, 322.0) = 12 46 35.32 2 22 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18741.2 +/- 161.4
  Background counts = 19.0
  Rate = 2 +/- 0.01

[Mon May 13 10:36:20 2013] Off-axis axis estimate = 1.73'
[Mon May 13 11:55:15 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon May 13 11:55:15 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Mon May 13 11:55:15 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Mon May 13 11:55:15 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon May 13 12:11:32 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 12:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_src1.csv
[Mon May 13 12:11:32 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 12:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_src1.csv
[Mon May 13 12:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:11:32 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 12:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 12:11:32 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 12:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 12:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051760101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:11:42 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.643160 pixels away
[Mon May 13 12:11:42 2013] Source 1 is offset by 0.097096 and -5.820277 pixels which is larger than
2 X fitted extent = 3.519536 x 3.519536, not incorporating fit results
[Mon May 13 12:11:42 2013] Vigneting correction estimate = 1.000000
[Mon May 13 12:11:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 12:11:42 2013] Assessing source extent using major
[Mon May 13 12:11:42 2013] Source does appear to be extended
[Mon May 13 12:11:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 13:23:09 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:23:09 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Mon May 13 13:23:09 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Mon May 13 13:23:09 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Mon May 13 13:37:40 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 13:37:40 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 13:37:40 2013] Fit fullrun_mos2_xmm0051760101_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon May 13 13:37:40 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 13:37:40 2013] fullrun_mos2_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 13:37:40 2013] Fit fullrun_mos2_xmm0051760101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 13 13:37:49 2013] Spatial fit model total counts = 17431.500000, observed total counts = 16950.000000
[Mon May 13 13:37:49 2013] Offset between fit and detection position for source 1 = 0.203516 pixels
[Mon May 13 13:37:49 2013] 17561.370000 total counts/ 4272.070000 bgd. counts: snr = 203.321322
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.203516 pixels
  Position = (301.5, 322.1) = 12 46 35.38 2 22 8.0
  Extent = 6.1 (6.0-6.2)" x 5.4 (5.3-5.5)", rotation angle = 334 (328-339) degrees
  Source counts = 13289.3 +/- 132.5
  Background counts = 4272.1
  Rate = 1 +/- 0.01
[Mon May 13 13:37:49 2013] Vigneting correction estimate = 1.000000
[Mon May 13 13:37:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 13:37:49 2013] Assessing source extent using major axis lower bound
[Mon May 13 13:37:49 2013] Source does appear to be extended
[Mon May 13 13:37:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Mon May 13 15:29:12 2013] Counts = 13289.300000, rescaling region sizes by 3.000000
[Mon May 13 15:29:12 2013] XMMSAS src. selection expression = ellipse(26180.650600, 27972.550000, 1104.217232, 968.607028, 334.360400, X, Y)
[Mon May 13 15:29:12 2013] Writing source region out to fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 15:29:12 2013] Extracting stamp from image fullrun_mos2_xmm0051760101_pi300-10000_cl_sm2.00.img.gz, (238, 259) - (365, 386)
[Mon May 13 15:29:12 2013] XMMSAS bgd. selection expression = annulus(26180.650600, 27972.550000, 5521.086159, 11042.172318, X, Y) && !ellipse(24263.110800, 30441.275600, 426.844812, 363.040010, 347.420627, X, Y) && !ellipse(34513.165985, 27682.155273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37455.384600, 33794.083400, 850.016024, 386.148811, 71.883918, X, Y) && !ellipse(27126.832001, 27729.420105, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 15:29:12 2013] Writing fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1.gif
[Mon May 13 15:29:15 2013] Mean detx,y = (42.86, 96.26) 
[Mon May 13 15:29:17 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 15:33:32 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 15:33:32 2013] Setting source spectrum file to fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 15:33:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 13 15:42:49 2013] Updating aperture counts using extracted products
[Mon May 13 15:42:49 2013] Total counts from fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 17741.00
[Mon May 13 15:42:49 2013] Total counts from fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 20069.00
[Mon May 13 15:42:49 2013] Got source and background scale factors 3111144.000000, 264130540.000000
[Mon May 13 15:42:49 2013] User source parameters:
  Position = (301.5, 322.1) = 12 46 35.38 2 22 8.0
  Extent = 6.1 (6.0-6.2)" x 5.4 (5.3-5.5)", rotation angle = 334 (328-339) degrees
  Source aperture counts = 17504.6 +/- 134.2
  Background aperture counts = 236.4
  Rate = 1 +/- 0.01

[Mon May 13 15:42:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 15:42:50 2013] Using photon index=1.80, rate=1.08, arf fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1.arf
[Mon May 13 15:42:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 15:42:50 2013] Updating source flux to 1.1e-11
[Mon May 13 15:42:52 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon May 13 15:42:54 2013] xmm0051760101/analysis//spectral/fullrun_mos2_xmm0051760101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete