[Sat Jun 22 05:09:24 2013] Detection parameters:
  Position = (225.8, 295.1) = 19 35 40.15 -52 50 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.3 +/- 9.8
  Background counts = 15.6
  Rate = 0.002 +/- 0.0005

[Sat Jun 22 05:09:25 2013] Off-axis axis estimate = 5.27'
[Sat Jun 22 05:38:31 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:31 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Sat Jun 22 05:38:31 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.124
[Sat Jun 22 05:38:31 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.06"
[Sat Jun 22 06:03:08 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jun 22 06:03:08 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jun 22 06:03:08 2013] Fit fullrun_mos1_xmm0051610101_pi300-10000_cl_pass0_src12 appears to have run properly
[Sat Jun 22 06:03:08 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jun 22 06:03:08 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jun 22 06:03:08 2013] Fit fullrun_mos1_xmm0051610101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Jun 22 06:24:07 2013] Spatial fit model total counts = 188.847000, observed total counts = 189.000000
[Sat Jun 22 06:24:07 2013] Offset between fit and detection position for source 10 = 0.087541 pixels
[Sat Jun 22 06:24:07 2013] 186.304000 total counts/ 159.617000 bgd. counts: snr = 2.112322
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.087541 pixels
  Position = (225.9, 295.0) = 19 35 40.12 -52 51 0.7
  Extent = 7.6 (2.9-15.4)" x 2.7 (2.3-5.8)", rotation angle = 94 (72-135) degrees
  Source counts = 26.7 +/- 13.6
  Background counts = 159.6
  Rate = 0.001 +/- 0.0006
[Sat Jun 22 06:24:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 06:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 06:24:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 06:24:07 2013] Source does appear to be extended
[Sat Jun 22 06:24:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Sat Jun 22 06:59:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 06:59:17 2013] Initial guess for spatial extent in simple fitting = 5.17"
[Sat Jun 22 06:59:17 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.402
[Sat Jun 22 06:59:17 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 5.17"
[Sat Jun 22 07:27:48 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jun 22 07:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_src12.csv
[Sat Jun 22 07:27:48 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jun 22 07:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_src12.csv
[Sat Jun 22 07:27:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 07:27:48 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jun 22 07:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Jun 22 07:27:48 2013] fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jun 22 07:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Jun 22 07:27:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051610101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 07:52:01 2013] Warning, spatial fit 12 centroid is now closest to src. 12
[Sat Jun 22 07:52:01 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 07:52:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 07:52:01 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 07:52:01 2013] Source does appear to be extended
[Sat Jun 22 07:52:01 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Sat Jun 22 08:13:56 2013] XMMSAS src. selection expression = ellipse(19603.355980, 25617.147000, 457.529413, 163.320605, 93.932110, X, Y)
[Sat Jun 22 08:13:56 2013] Writing source region out to fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 22 08:13:56 2013] Extracting stamp from image fullrun_mos1_xmm0051610101_pi300-10000_cl_sm2.00.img.gz, (200, 269) - (252, 321)
[Sat Jun 22 08:13:56 2013] XMMSAS bgd. selection expression = annulus(19603.355980, 25617.147000, 762.549022, 1525.098044, X, Y) && !ellipse(19588.504000, 24775.342800, 658.698419, 188.849605, 123.111400, X, Y)
[Sat Jun 22 08:13:56 2013] Writing fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10.gif
[Sat Jun 22 08:18:20 2013] Mean detx,y = (542.83, 4654.33) 
[Sat Jun 22 08:18:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 08:18:31 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 08:18:31 2013] Setting source spectrum file to fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 22 08:18:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 22 08:20:46 2013] Not generating rmf since there are only 26 counts
[Sat Jun 22 08:20:46 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:32:33 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:32:33 2013] Total counts from fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 46.00
[Sat Jun 22 08:32:33 2013] Total counts from fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 441.00
[Sat Jun 22 08:32:33 2013] Got source and background scale factors 235200.000000, 5135268.000000
[Sat Jun 22 08:32:33 2013] User source parameters:
  Position = (225.9, 295.0) = 19 35 40.12 -52 51 0.7
  Extent = 7.6 (2.9-15.4)" x 2.7 (2.3-5.8)", rotation angle = 94 (72-135) degrees
  Source aperture counts = 25.8 +/- 7.8
  Background aperture counts = 20.2
  Rate = 0.001 +/- 0.0004

[Sat Jun 22 08:32:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:32:34 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10.arf
[Sat Jun 22 08:32:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:32:34 2013] Updating source flux to 2.2e-14
[Sat Jun 22 08:32:39 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 08:32:41 2013] xmm0051610101/analysis//spectral/fullrun_mos1_xmm0051610101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete