[Thu Dec  1 15:28:44 2011] Detection parameters:
  Position = (205.0, 377.1) = 9 23 35.92 -63 10 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.7 +/- 15.1
  Background counts = 4.9
  Rate = 0.04 +/- 0.004

[Thu Dec  1 15:28:45 2011] Off-axis axis estimate = 8.86'
[Thu Dec  1 15:30:11 2011] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 15:30:11 2011] Initial guess for spatial extent in simple fitting = 10.86"
[Thu Dec  1 15:30:11 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Thu Dec  1 15:30:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.86"
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec  1 16:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src3.csv
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec  1 16:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src3.csv
[Thu Dec  1 16:55:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec  1 16:55:33 2011] Fit fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec  1 17:47:38 2011] Spatial fit model total counts = 383.534000, observed total counts = 381.000000
[Thu Dec  1 17:47:38 2011] Offset between fit and detection position for source 3 = 4.193879 pixels
[Thu Dec  1 17:47:38 2011] Warning, changing simple spatial fit ID from 3 to 2
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.193879 pixels
  Position = (202.2, 380.2) = 9 23 37.69 -63 10 8.5
  Extent = 18.7 (17.2-21.1)", rotation angle = 0
  Source counts = 387.5 +/- 19.7
  Background counts = 0.0
  Rate = 0.1 +/- 0.005
 Deleting source due to low signal-to-noise ratio