[Thu Dec 1 15:28:44 2011] Detection parameters: Position = (483.3, 383.2) = 9 20 37.14 -63 9 52.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 28.4 +/- 6.7 Background counts = 2.5 Rate = 0.007 +/- 0.002 [Thu Dec 1 15:28:45 2011] Off-axis axis estimate = 14.74' [Thu Dec 1 15:30:11 2011] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting [Thu Dec 1 15:30:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 1 15:30:11 2011] Initial guess for spatial extent in simple fitting = 13.80" [Thu Dec 1 15:30:11 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.908 [Thu Dec 1 15:30:11 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 13.80" [Thu Dec 1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src20.ximg exists [Thu Dec 1 16:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src20.csv [Thu Dec 1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src20_1.ximg exists [Thu Dec 1 16:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src20.csv [Thu Dec 1 16:55:33 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Dec 1 16:55:34 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Thu Dec 1 16:55:34 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Thu Dec 1 16:55:34 2011] Fit fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Thu Dec 1 17:47:38 2011] Spatial fit model total counts = 61.853000, observed total counts = 61.000000 [Thu Dec 1 17:47:38 2011] Offset between fit and detection position for source 20 = 0.204553 pixels [Thu Dec 1 17:47:38 2011] 59.810300 total counts/ 41.430400 bgd. counts: snr = 2.855509 Spatial fit parameters: Offset between fit and detection position for source 20 = 0.204553 pixels Position = (483.1, 383.1) = 9 20 37.26 -63 9 53.7 Extent = 3.4" x 3.4", rotation angle = 0 Source counts = 18.4 +/- 7.7 Background counts = 41.4 Rate = 0.005 +/- 0.002 [Thu Dec 1 17:47:38 2011] Vigneting correction estimate = 1.000000 [Thu Dec 1 17:47:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 1 17:47:38 2011] Assessing source extent using major [Thu Dec 1 17:47:38 2011] Source does appear to be extended [Thu Dec 1 17:47:38 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 1 17:47:38 2011] Deleting source due to low Poisson probability 0.8