[Thu Dec  1 15:28:44 2011] Detection parameters:
  Position = (299.9, 276.0) = 9 22 34.91 -63 17 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48132.9 +/- 263.9
  Background counts = 9.8
  Rate = 1e+01 +/- 0.08

[Thu Dec  1 15:28:45 2011] Off-axis axis estimate = 1.63'
[Thu Dec  1 15:30:11 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 15:30:11 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Dec  1 15:30:11 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Dec  1 15:30:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec  1 16:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec  1 16:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 16:55:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec  1 16:55:33 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec  1 16:55:33 2011] Fit fullrun_pn_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec  1 17:47:38 2011] Spatial fit model total counts = 43465.900000, observed total counts = 43466.000000
[Thu Dec  1 17:47:38 2011] Offset between fit and detection position for source 1 = 0.088398 pixels
[Thu Dec  1 17:47:38 2011] 43434.130000 total counts/ 8709.530000 bgd. counts: snr = 372.083055
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.088398 pixels
  Position = (299.9, 276.1) = 9 22 34.97 -63 17 42.4
  Extent = 6.3 (6.3-6.4)", rotation angle = 0
  Source counts = 34724.6 +/- 208.4
  Background counts = 8709.5
  Rate = 9 +/- 0.05
[Thu Dec  1 17:47:38 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 17:47:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 17:47:38 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 17:47:38 2011] Source does appear to be extended
[Thu Dec  1 17:47:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 17:47:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 17:47:48 2011] Initial guess for spatial extent in simple fitting = 6.32"
[Thu Dec  1 17:47:48 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.048
[Thu Dec  1 17:47:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.32"
[Thu Dec  1 18:44:24 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec  1 18:44:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 18:44:24 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec  1 18:44:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 18:44:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 18:44:24 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec  1 18:44:24 2011] fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec  1 18:44:24 2011] Fit fullrun_pn_xmm0051590201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 18:57:12 2011] Spatial fit model total counts = 43466.000000, observed total counts = 43466.000000
[Thu Dec  1 18:57:12 2011] Offset between fit and detection position for source 1 = 0.000000 pixels
[Thu Dec  1 18:57:12 2011] 43434.190000 total counts/ 8709.590000 bgd. counts: snr = 372.081773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (299.9, 276.1) = 9 22 34.97 -63 17 42.4
  Extent = 6.3 (6.3-6.4)", rotation angle = 0
  Source counts = 34724.6 +/- 208.4
  Background counts = 8709.6
  Rate = 9 +/- 0.05
[Thu Dec  1 18:57:12 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 18:57:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 18:57:12 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 18:57:12 2011] Source does appear to be extended
[Thu Dec  1 18:57:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 18:57:12 2011] Source is confused with source 15
[Thu Dec  1 18:57:17 2011] Counts = 34724.600000, rescaling region sizes by 3.000000
[Thu Dec  1 18:57:17 2011] XMMSAS src. selection expression = ellipse(26038.679740, 23970.696800, 1138.111233, 1138.111233, 0.000000, X, Y)
[Thu Dec  1 18:57:17 2011] Writing source region out to fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec  1 18:57:17 2011] Extracting stamp from image fullrun_pn_xmm0051590201_pi300-10000_cl_sm2.00.img.gz, (234, 211) - (365, 341)
[Thu Dec  1 18:57:17 2011] XMMSAS bgd. selection expression = annulus(26038.679740, 23970.696800, 5690.556164, 11381.112327, X, Y) && !ellipse(18781.660000, 31685.222000, 1541.800044, 1541.800044, 0.000000, X, Y) && !ellipse(19169.216000, 31289.650000, 1551.160045, 1551.160045, 0.000000, X, Y) && !ellipse(20324.882000, 30058.886000, 2362.224068, 2362.224068, 0.000000, X, Y) && !ellipse(21132.104000, 29274.680000, 1453.168042, 1453.168042, 0.000000, X, Y) && !ellipse(22136.876000, 28164.014000, 1269.440037, 1269.440037, 0.000000, X, Y) && !ellipse(22687.984100, 27539.535065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23715.400000, 26551.642000, 1146.832033, 1146.832033, 0.000000, X, Y) && !ellipse(25216.506000, 24745.990000, 2236.096064, 910.112026, 227.359000, X, Y) && !ellipse(36056.997622, 21034.865400, 501.026414, 501.026414, 0.000000, X, Y) && !ellipse(16291.122452, 34366.908386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.986000, 25499.636000, 1118.048032, 1118.048032, 0.000000, X, Y)
[Thu Dec  1 18:57:17 2011] Writing fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1.gif
[Thu Dec  1 18:57:25 2011] Mean detx,y = (181.73, -23.13) 
[Thu Dec  1 18:57:28 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 19:01:21 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 19:01:21 2011] Setting source spectrum file to fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 19:01:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec  1 20:09:03 2011] Updating aperture counts using extracted products
[Thu Dec  1 20:09:03 2011] Error reading totcts from fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 20:09:03 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 20:09:03 2011] Using photon index=1.80, rate=8.79, arf fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 20:09:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 20:09:03 2011] Updating source flux to 1.9e-11
[Thu Dec  1 20:09:37 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Dec  1 20:10:24 2011] Reading fit data from xmm0051590201/analysis//spectral/fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Dec  1 20:10:24 2011] Spectral fit parameter nH value = 1.95419e+21
[Thu Dec  1 20:10:24 2011] Spectral fit parameter PhoIndex value = 1.47171
[Thu Dec  1 20:10:24 2011] Failed to get F(0.3-8.0) from xmm0051590201/analysis//spectral/fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Dec  1 20:10:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 20:10:24 2011] Using Nh = 2e+21, photon index=1.47, rate=8.79, arf fullrun_pn_xmm0051590201_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 20:10:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 20:10:24 2011] Updating source flux to 3.4e-11